Optimization Cutting Parameters When Grinding ШX15 Steels Using Hai Duong Grinding Wheel
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
This paper presents an experimental research to build two regressions of the relationship between machining surface roughness and cutting parameters when grinding the ШX15 steels by Hai Duong grinding wheels. Two types of Hai Duong grinding wheel were used that are Cn46.TB1.G.V1.400x40x203x50m/s and Cn46.CV1.G.V1.400x40x203x35m/s. Three cutting parameters were considered that are depth of cut, feed rate, and workpiece velocity. Genetic algorithm was used to find the values of cutting parameters for minimum value of surface roughness. By the proposed method of this work, the optimization values of cutting parameters was determined for each pair of workpiece - wheel.This method can be used to improve the quality of machining surface in grinding prosesses
Authors and Affiliations
Hoang , Tien Dung, Do Duc Trung, Nguyen Van Thien, Nguyen Nhu Tung, Ngo Cuong
Keywords
Related Articles
- EP ID EP655094
- DOI 10.24247/ijmperdaug201917
- Views 92
- Downloads 0
The Effect of Ambient Temperature on Human Strength
Impact of environmental conditions like temperature is usually not considered in the measurement of work content analysis. However, to ensure healthy work conditions, it is imperative that studies on the effects of heat...
Renewable Energy Based Micro-Grid System for Power Quality Improvement
In recent years the microgrid had produced more power and utilized in the various application. The linear and non-linear load is used in grid-connected PV based converter system. The novel control strategy used to offer...
Finite Element Analysis of Mono Composite Leaf Spring of Varying Thickness and Varying Width used in Automotives
The purpose of the work is, to analyze Unidirectional Glass Fiber/Epoxy mono composite leaf spring, for replacing the steel leaf spring by fiberglass composite leaf spring in automotives, by decreasing the weight and inc...
Wettability Analysis on Copper Substrate by Emery Abrasion and Copper Nano Coating
In recent years, the heat removal from the thermal system plays a major role in all heat generating equipments. It is very important in electronic products, nuclear reactor etc. Effective heat removal is done by differen...
Design of Low Power and Area Efficient Full Adder for ALU Using 90nm Process for Industrial Based CAD/CAM Manufacturing Units
The research article shows a high accuracy of full adder with less zone and power utilization. The GDI based full adder wasactualized by utilizing both entryway dispersion through input gate diffusion system and rational...