Optimization of Cnc Turning Parameters for Al-6061 Using Response Surface Methodology
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 4
Abstract
As per the present manufacturing scenario, focus of all manufacturing organizations, is to produce good quality product with a minimum cost. CNC turning process is the most common machining process that is used in now days. Present work has been done, to optimize the machining parameters, for material AL 6061 like, depth of cut, feed rate and cutting speed. MINITAB software is used for formulating the matrix and, for the analysis of regression and response surface methodology.
Authors and Affiliations
Naveen Kumar Nayak, Harsimran Singh Sodhi
Keywords
Related Articles
- EP ID EP240305
- DOI -
- Views 84
- Downloads 0
Design and Analysis of Helical Gear using Solid works and ANSYS Softwares
Gears are one of the important parts and that are indispensable for mechanical power transmission systems. There are many stresses that can cause failure in gears in mechanical transmission systems. Bending Stress is one...
Comparing Parametric Optimization of the Machining Parameters of Al2024-Sic for MRR using Taguchi and Applied Statistical Plots
In today’s competitive world, the industries should have production systems which are capable of versatility, high production rate, precision and ability to produce highly finished goods. Due to this the value of input m...
Numerical Investigations for the Effect of Cold and Hot Air on Various Parameters of Flow through A Super Sonic Nozzle at Higher Altitudes
An ejector system is to be designed in order to pump out the gasses from low pressure to ambient conditions. Ejectors mainly use the principles of fluid dynamics for pumping. They do not consist of any mechanical parts a...
A STUDY ON OIL FIELD SANDSTONE THROUGH POROSITY AND PERMEABILITY PARAMETERS
Crude oil reservoirs have different formation types according to their environmental and geological conditions. Sandstone is one of the most common formations of crude oil reservoir, which has high oil bearing capacity t...
AL3O2 AND NICKEL COATINGS ON RESISTANCE WELDING ELECTRODES USING CHEMICAL VAPOUR DEPOSITION PROCESS TO EXTEND LIFE
Any alteration in the standard machining process can lower the quality of finished product. This is especially true in high-speed machining operations, where despite the pace, the quality of the product and physical dime...