Optimization of Drilling Parameters on Surface Roughness of Al 1200-SiC Composites Using Taguchi Analysis
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 3
Abstract
In present study, the matrix material Al 1200 reinforced with various percentages (5% and 10%) of SiC particles. Stir casting method employed for producing AlSiC MMCs since it is simple and cheapest method used for producing Aluminium Matrix Composites (AMCs). Main purpose of this investigation is to study the effects of drilling parameters (Spindle Speed, Feed Rate and Depth of Cut) on Surface Roughness. Drilling carried out using CNC Vertical Machining Centre for varying drilling parameters. Surface roughness found out around drilled hole circumferences using surface roughness tester. Taguchi method and Analysis of Variance (ANOVA) employed for finding optimal drilling parameters values on minimizing surface roughness and also to find out most effective drilling parameter on minimizing surface roughness. It was found that Depth of cut is the most effective parameter for 5% AlSiC MMC and Spindle speed is the most effective parameter for 10% AlSiC MMC.
Authors and Affiliations
Krishnaprakasha . , Pavitra Ajagol
Keywords
Related Articles
- EP ID EP437963
- DOI 10.9790/1684-1503047784.
- Views 72
- Downloads 0
Performance Evaluation of a Simple Gas Turbine Power Plant Using Vapour Absorption Chiller
The performance of gas turbines in whichever way is operated; either as a simple cycle or a combined cycle is critically constrained by the prevailing ambient temperature, predominantly in arid or tropical climates Sub-S...
Research on the Status Quo of Steel Strip Rust Removal Technology
Steel is an indispensable metal material for modern industrial development. It has a huge amount of use and it involves a wide range of industries. However, the easily oxidized and easily acid-base corrosion chemical pro...
Bending Analysis of Isotropic Beam using “Hyperbolic Shear Deformation Theory”
A new hyperbolic shear deformation theory for bending of isotropic beams, in which number of variables is same as that in the hyperbolic shear deformation theory, is developed. The theory takes into account transverse sh...
Application of Cost Control to Construction Projects
A high rate project abandonment due to cost over-run has really defaced the most cities. Among the success parameters of construction project namely: cost, quality and time, the project cost was the most significant amon...
Mechanical Properties of Concrete Using Optical and Glass Fibre
Concrete has been used since Roman times for the development of infrastructure and housing, but its basic components have remained the same. Three ingredients make up the dry mix: coarse aggregate, consisting of larger p...