Optimization of joint recycling process of drilling sludge and phosphogypsum
Journal Title: Журнал інженерних наук - Year 2016, Vol 3, Issue 1
Abstract
Joint recycling of drilling sludge and phosphogypsum with obtaining a building material is environmentally appropriate and cost-effective, as it helps not only to prevent environmental pollution, but also to solve the problem of rational nature management. Drilling sludge is a waste formed during drilling oil wells, and phosphogypsum is a waste of the chemical industry, formed as a result of the production of concentrational phosphoric acid. However, technogenic raw materials contain heavy metals that can be transformed into a finished product and leached out of it. The problem of minimizing the negative impact of pollutants is very important to reduce the risk to human health. The author's idea is to optimize ecological characteristics of drilling waste and phosphogypsum recycling process. The concentration of heavy metals in the extract of gypsum concrete was determined as the function of the target which depends primarily on structural and technological parameters. The purpose of the article is solution to mathematical programming task, i.e., finding optimal solutions for the factors values of drilling sludge and phosphogypsum recycling process. Mathematical programming solution to optimization problem of the gypsum concrete environmental characteristics (to minimize concentration of heavy metals in the extract) was performed by the method of simple random search in the Borland C++ programming environment using C programming language. It is necessary to observe the values of such factors to minimize concentration of heavy metals in the extract of gypsum concrete. The mass ratio of gypsum binder and drilling sludge is 2.93 units, the mass ratio of quick lime and gypsum binder is 0.09 units, the age of gypsum concrete is above 19 days, exposure time is 28 days.
Authors and Affiliations
I. Ablieieva
Keywords
Related Articles
- EP ID EP241738
- DOI -
- Views 94
- Downloads 0
Laser forming of austenitic stainless and manganese carbon steels
Laser forming has several advantages compared to the machining methods of workpieces. This method avoids sringback effect, thinning of the material in the processing zone. It can form brittle, tough, elastic material, sh...
Creating a simulation model of software testing using Simulink package
The determination of the solution model of software testing that allows prediction both the whole process and its specific stages is actual for IT-industry. The article focuses on solving this problem. The aim of the art...
Investigation of Non-linear Reactions in Rotors’ Bearing Supports of Turbo-pump Units for Liquid Rocket Engines
This paper is aimed at refinement of the computational model of the turbopump rotor systems associated taking into consideration the effect of rotation of moving parts and compliance of bearing supports elements. The up-...
Climate change modeling in the context of urban decarbonization strategy
The anthropogenic influence on the Earth’s climate is growing and the risks of the irreversible impacts on ecosystems also increase. This paper is focused on the long-term prediction of the climate change in Kyiv region...
Analysis of the gear tooth gearing by the module m = 2.625 mm of hydraulic pumps
The article deals with the method of finishing the cylindrical gears with diamond worm gear in mechanical engineering on a wide-universal milling machine. For processing, a special device has been developed, which provid...