OPTIMIZATION OF THERMO-FLOW IN A SOLAR FOOD DEHYDRATOR USING COMPUTATIONAL TECHNIQUES
Journal Title: Engineering and Technology Journal - Year 2023, Vol 8, Issue 11
Abstract
A solar food dehydrator converts solar energy into heat required to remove moisture from food. This study involved development of an optimized design for a solar dehydrator using computational techniques. A computer-aided design of six (6) different configurations of the dehydrator was developed, and a remotely-installed heat capture device was modelled and analysed using MATLAB. The results show that the Parabolic Trough Collector (PTC) could be used in effectively transferring heat remotely to a dehydrator. The temperature of air leaving the heat exchanger increases in proportion to the increase in the temperature of the heating fluid entering the heat exchanger. Computational Fluid Dynamics (CFD) in Ansys Fluent was employed to aid in the study of airflow and temperature distribution. The hot air was simulated at 2 m/s and 350 K inlet conditions. The CFD simulation results showed significant variations in the air velocity distribution and temperature for different configurations of the dehydrator. The back inflow - front outflow configuration provided the most uniform distribution of heated air in the drying chamber, with minimal variation on each tray. This uniformity was also observed in the distribution of static temperature. The back inflow – side outflow configuration showed a similar performance in flow and temperature distribution. However, the bottom inflow – top outflow and bottom inflow – front outflow configurations showed uneven velocity and temperature distribution inside the drying chamber. Supply of airflow across the trays horizontally provides best airflow and temperature distribution in solar dehydrators and thus highly recommended.
Authors and Affiliations
K. E. Akpan, A. A. Okon ,W. A. Akpan, I. I. Nyaudo,
Keywords
Related Articles
- EP ID EP724227
- DOI 10.47191/etj/v8i11.16
- Views 69
- Downloads 0
CONCENTRATED SOLAR THERMAL TECHNOLOGY FOR POWER GENERATION AND ITS CASE STUDIES
The dependence on conventional energy sources since the Industrial revolution has increased extensively, affecting our environment. Over-exploitation of natural resources has led to the increased global average temperatu...
A Critical Appraisal of Alternative Adsorption Refrigeration System Design Configurations: Enhancing Current Technologies with Innovative Approaches
Adsorption cooling technology (ACT) offers the potential for energy savings and supports environmental sustainability, aligning with current efforts to mitigate the impacts of global warming. However, the current technol...
Influence of Natural Filler Powder on the Some Physical Properties of Polyurethane Foam Composites
An investigation was conducted to analyze the impact of incorporating perlite stone powder particles at different weight ratios (5, 10, 15, 25, and 35) on the polyurethane polymer's mechanical properties and thermal cond...
A SURVEY ON PROGRAM CODE OBFUSCATION TECHNIQUE
Program code are distributed through internet and suffering from the program theft. Means a program is sold to user and user make own copyright of program called program theft. This is happen because program are easily d...
A Predictive Maintenance Framework for Offshore Industrial Equipment: Digital Transformation for Enhanced Reliability
This review presents a novel predictive maintenance framework designed to enhance the reliability of offshore industrial equipment by integrating artificial intelligence (AI), the Internet of Things (IoT), and 3D modelin...