Optimization of Thermomechanical Processing of Some Aluminum Alloys by Dimensional Interpolation Method Using the Matlab
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2013, Vol 36, Issue 4
Abstract
This paper presents results of research on optimization of thermomechanical treatment applied to an alloy of the Al-Zn-Mg-Cu system, used in the aviation industry.Optimizing thermomechanical treatment process is based on a mathematical model that establishes the relationships between the main technological parameters of thermomechanical processing and association of physical and mechanical properties of the alloy used. Findings are based on an laborious experimental program to elaborate the mathematical model, an essential element of thermomechanical treatment process optimization applied to the alloy studied for obtaining the required values of mechanical properties with the minimal cost.
Authors and Affiliations
Marian-Iulian NEACȘU, Doru HANGANU, Elisabeta VASILESCU
Keywords
Related Articles
- EP ID EP595966
- DOI -
- Views 89
- Downloads 0
Microstructural Characteristics of Sintered Powder Metallurgy Alloys
The purpose of this paper is to study the influence of processing parameters on the microstructural characteristics of sintered powder metallurgy alloys. The specimens were produced from atomised iron powders with differ...
Study of Tribocorrosion Processes by Electrochemical Techniques
Tribocorrosion is defined as the chemical-electrochemical-mechanical process leading to a degradation of materials in sliding, rolling or erosion contacts immersed in a corrosive environment. That degradation results fro...
Water-in-Diesel Emulsions as Alternative Fuel for Diesel Engines. Part I: Water-in-Diesel Emulsions. A Literature Review
Although emulsions have found numerous and various applications in chemical, pharmaceutical and food industries, emulsions of water in diesel fuel are applicable alternative fuels for the existing diesel engines. Water-i...
The Mechanism of Phase Transformation to Obtain Zinc-Iron Coatings
Important changes in the ratio of constitutive phases take place during heating of galvanized parts due to Zn coating layer changed into Zn-Fe alloy. The work deals with a mathematical correlation between diffusion pheno...
Modern Approaches in Design Optimization of Parts and the Development Trend of Surface Treatments
This paper summarizes the surface engineering technologies having a substantial contribution to increasing operational performance of the parts as well as current trends in the implementation of surface processing techno...