Optimization of Waste Discharge Points in Natural Streams
Journal Title: Trends in Civil Engineering and its Architecture - Year 2018, Vol 2, Issue 5
Abstract
This paper reports on a study carried out to optimize the locations of multiple discharge points in a receiving stream, Amadi creek, so as to minimize the impact of oxygen demanding resources (BOD) on water quality. The study evaluated the water quality changes as a result of the increasing human and industrial activities around the creek. Water quality standards require the maintenance of dissolved oxygen (DO) concentration of 5mg/l or more at any time in streams. However practical analysis of the water samples from Amadi creek reveal a DO level as low as 2.3mg/l. The DO deficit was computed from data generated by sampling DO concentrations along the creek from various points of waste discharge downstream while the BOD of the stream was determined by monitoring BOD of samples obtained along the creek. The study also identified and quantified the amount of effluent entering the creek from various point sources. The DO deficit equations are solved by the methods of simple calculus (classical optimization), which simplifies the mathematical solution of the model equations by avoiding difficult to evaluate integrals Two scenarios were identified and used to investigate the effect of BOD on the DO level in the stream, using mathematical simulation techniques. Simulation results show that to ensure minimum impact of BOD on water quality waste discharge locations should be placed at the optimal locations of 10015.382m and 6992.282m upstream and downstream waste discharge points respectively, at an optimum DO deficit of 4.135mg/l for case 1.For case2, the waste discharge locations are to be placed at optimal locations 40995.43m, 30665.17m, 41233.69m upstream and downstream waste discharge points respectively at an optimum DO deficit of 4.567mg/l. This means that if a new waste input is proposed for a stream its BOD input and its proposed location with respect to other inputs are important in order to determine the effect on the DO level in the stream Discharges from the second treatment plant would result in decreased dissolved oxygen level for a substantial distance downstream. This can have significant effects for streams and rivers with many influent waste streams over their course, as the dissolved oxygen (DO) will not have a chance to recover between each influent stream, resulting in significantly depressed oxygen levels .The dissolved oxygen (DO) deficit becomes zero at approximately the same distance downstream for both cases, though the two point source discharge case (case2) shows a higher short term DO deficit. This can cause problems if they DO concentration drops below the stipulated levels for the creek, leading to possible death of fish and other aquatic lives. It is therefore recommended that industrial establishments planning to site their treatment facilities along rivers or streams should be compelled to discharge their waste stream in compliance with the optimal locations with respect to any existing plant, so as to avoid undue dissolved oxygen (DO) depletion
Authors and Affiliations
Ezeilo FE, Agunwamba JC
Keywords
Related Articles
- EP ID EP608036
- DOI 10.32474/TCEIA.2018.02.000148
- Views 71
- Downloads 0
Smart City by Smart Lighting: Utilizing Smart Lighting in Urban Texture Based on Effective Using of Power to Save in Macro Economy and Create Diversity in Cities
Lighting is the requirement of the present world realized by artificial lighting especially at nights. However, the price paid is not as much rational threatening the national economy. Today, permanent facing with econom...
Integration of Multiple Uses to Create a Central Place for the Community: An Approach towards a Sustainable Town Centre Development at Baze Shilinda, Rajshahi
Town centre is the social hub of the town in which the central services of the highest order are found. For being one of the fast growing cities in Bangladesh, Rajshahi needs sustainable town centre with the integration...
Formal Region Delineation on the Basis of Agricultural Productivity and Growth Center
Agricultural is the largest employment sector of Bangladesh and most of the people earn their living from agricultural production. The magnitude of agricultural production varies spatially as agricultural production depe...
Estimating Deformations of Laboratory Structures Subjected to Loadings Using Images Collected with Phone Camerase
A Fundamental civil engineering knowledge is the ability to understand, explain and calculate deformations of/in civil structures. New civil engineers acquire this knowledge at universities in material science, engineeri...
Application of Non-Destructive Testing and Signal Processing Characteristics to Identify Defects and Microstructural Changes in Advanced High Strength Steels
Nondestructive testing (NDT) and signal processing were used to detect, locate and define surface and internal defects in unidirectionally solidified laboratory ingots. These defects included cracks, voids, coarse non-me...