Outsourcing control of work of devices of relay protection and control in power smart-grid. Part 2 Modelling.

Abstract

The paper discusses building a workplace-of-service in the CAD system for tasks of control, monitoring the efficiency of the network, as well as prevention of injuries. Decisions are based on the separation of motions in frequency and meaning with the help of the structural information of the method. We show how to improve the algorithms of the devices on the basis of mutual correspondence of two generalized block diagrams of the control object and control devices. The simulation becomes stable, hierarchically consistent and clear. The modelling process results in the formation of a way of representing the information on the performance of electrically-connected network in the form of diagnostic messages and restoration of a sense of transie nt processes by leveraging semantic signals file. An example of simulation of systems and information processing and transfer for smart -grid networks of medium voltage class is provided.

Authors and Affiliations

V. F. SYVOKOBYLENKO, A. P. NIKIFOROV

Keywords

Related Articles

Model of asynchronous motors with a short-cooled rotor in Mathcad software.

In the article, for a specific example, the model of the asynchronous motor with short-circuited rotor in the MATHCAD software environment is considered. In compiling the model, displacement of the current in...

Hydrodynamic processes in disk unloaders of mine pumps.

In the article theoretical researches of hydrodynamic processes of disk unloaders of mine pumps, axial oscillatory processes of the pump rotor and influence of various param-eters of the unloading device on dynamic stab...

Quasioptimal control of synchronous motor with permanent magnets using a strategy of "maximum torque per ampere"

For synchronous motors with built-in permanent magnet rotor was made a comparison control strategy "maximum torque per ampere (MTPA)" and the sample vector control algorithm with maintaining co...

Heat losses minimization during demagnetization process in vector-controlled induction motor.

Analysis of heat losses during demagnetization of motor windings has been done for induction machine in direct field -oriented control system. Euler’s optimization method was used for solving the problem of finding the...

Enhancing the efficiency of distribution electric networks 6-35 kv.

The methods of enhancing the efficiency of distribution electric networks 6-35 kV with different modes of neutral networks. It is noted that in networks with resonant earthed neutral circuits with phase-to-ground not...

Download PDF file
  • EP ID EP661016
  • DOI -
  • Views 177
  • Downloads 0

How To Cite

V. F. SYVOKOBYLENKO, A. P. NIKIFOROV (2015). Outsourcing control of work of devices of relay protection and control in power smart-grid. Part 2 Modelling.. Наукові праці Донецького Національного Технічного Університету серія: Електротехніка і Енергетика, 1(1), 96-103. https://europub.co.uk/articles/-A-661016