PARAMETERIZATION OF ENVIRONMENTAL INFLUENCES BY AUTOMATED CHARACTERISTIC DIAGRAMS FOR THE DECOUPLED FLUID AND STRUCTURAL-MECHANICAL SIMULATIONS
Journal Title: Journal of Machine Engineering - Year 2019, Vol 19, Issue 1
Abstract
Thermo-elastic effects contribute the most to positioning errors in machine tools especially in operations where high precision machining is involved. When a machine tool is subjected to changes in environmental influences such as ambient air temperature, velocity or direction, then flow (CFD) simulations are necessary to effectively quantify the thermal behaviour between the machine tool surface and the surrounding air (fluid). Heat transfer coefficient (HTC) values effectively represent this solid-fluid heat transfer and it serves as the boundary data for thermo-elastic simulations. Thereby, deformation results can be obtained. This two-step simulation procedure involving fluid and thermo-structural simulations is highly complex and time-consuming. A suitable alternative for the above process can be obtained by introducing a clustering algorithm (CA) and characteristic diagrams (CDs) in the workflow. CDs are continuous maps of a set of input variables onto a single output variable, which are trained using data from a limited number of CFD simulations which is optimized using the clustering technique involving genetic algorithm (GA) and radial basis function (RBF) interpolation. The parameterized environmental influences are mapped directly onto corresponding HTC values in each CD. Thus, CDs serve as look-up tables which provide boundary data (HTC values along with nodal information) under several load cases (combinations of environmental influences) for thermo-elastic simulations. Ultimately, a decoupled fluid-structural simulation system is obtained where boundary (convection) data for thermo-mechanical simulations can be directly obtained from CDs and would no longer require fluid simulations to be carried out again. Thus, a novel approach for the correction of thermo-elastic deformations on a machine tool is obtained.<br/><br/>
Authors and Affiliations
Janine GLÄNZEL, Tharun Suresh KUMAR, Christian NAUMANN, Matthias PUTZ
Keywords
Related Articles
- EP ID EP518260
- DOI 10.5604/01.3001.0013.0461
- Views 41
- Downloads 0
ACCURACY OF WORK TOOL POSITION MEASUREMENT BY MEANS OF A DRILLING MONITORING SYSTEM
The article presents examples of test results of an innovative, optical system of tool location identification in a workspace. This system was developed and produced as part of the research carried out in cooperation wit...
AUTOMATED ROOT CAUSE ANALYSIS OF NON-CONFORMITIES WITH MACHINE LEARNING ALGORITHMS
To detect root causes of non-conforming parts - parts outside the tolerance limits - in production processes a high level of expert knowledge is necessary. This results in high costs and a low flexibility in the choice o...
PARAMETERIZATION OF ENVIRONMENTAL INFLUENCES BY AUTOMATED CHARACTERISTIC DIAGRAMS FOR THE DECOUPLED FLUID AND STRUCTURAL-MECHANICAL SIMULATIONS
Thermo-elastic effects contribute the most to positioning errors in machine tools especially in operations where high precision machining is involved. When a machine tool is subjected to changes in environmental influenc...
DESIGN APPROACH FOR HIGH-DYNAMIC PLANAR MOTION SYSTEMS BASED ON THE PRINCIPLE OF KINEMATICALLY COUPLED FORCE COMPENSATION
Machine tools’ feed dynamics are usually limited in order to reduce excitation of machine structure oscillations. Consequently, the potential increase in productivity provided by direct drives, e.g. linear motors, cannot...
DIGITAL TWIN BASED SYNCHRONISED CONTROL AND SIMULATION OF THE INDUSTRIAL ROBOTIC CELL USING VIRTUAL REALITY
During the years common understanding of the possibilities and perspectives of Virtual Reality (VR) usage has been changed. It is thought that VR is mainly used in entertainment purposes, but it is being used already for...