Parameters monitoring and control for flueric actuators testing system
Journal Title: INCAS BULLETIN - Year 2014, Vol 6, Issue 1
Abstract
A wide range of air supply parameters is needed for the flueric actuators testing in order to find their optimum working regime. A system for conditioning these parameters, namely pressure, temperature, mass and volume flow rate has been built for this purpose. The measured values are continuously stored on the PC hard drive and are checked automatically for keeping them in the normal operating range. In case any of them are going out of this range, this system warns the operator and performs automatic actions for limiting or partially or totally shutting down the system.
Authors and Affiliations
SALAORU Tiberiu Adrian, ANDREI Marina, ION GUTA Dragos Daniel , ARGHIR Minodor
Keywords
Related Articles
- EP ID EP88355
- DOI 10.13111/2066-8201.2014.6.S1.15
- Views 155
- Downloads 0
Future directions of fuel efficiency in aviation industry
A major goal for the aviation community is reducing fuel consumption. Nowadays we can see so much effort to design a modern aircrafts that offer weight and low fuel burn savings. This study could help to understand the l...
Tuning of the Wavelet Filters for the IMU Data Based on the PDC Method and the GPS Solution in a Bi-Dimensional Navigation Application
The degradation of navigation accuracy and integrity of GPS in the presence of radio frequency interference, hostile jamming and high dynamical situations, when the satellite signals may get lost due to signal blockage,...
The Effects of Fibre Volume Fraction on a Glass-Epoxy Composite Material
This paper focuses on the analysis of the longitudinal mechanical properties of Glass Fibre Reinforce Plastic (GFRP) plates with different fibre volume fraction, Vf, by considering both analytical and experimental method...
An Interpretation of the “Black Energy” in Universe by Using a Hydro-Dynamical Analogy with Newton Gravity
There are arguments proving that what we see now as “normal energy” (including the equivalent mass-energy) represents only 5% of the total energy of the Universe [1]. The rest is invisible meaning that no widely accepted...