Parameters of the emitters of a cold plasma
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2011, Vol 0, Issue 46
Abstract
Investigatedin the microwave range radiophysical characteristics of cold plasma gas discharge andelectromagnetic characteristics of the U-shaped loop and a straight rod plasma emitters (PE)performed on the basis of the plasma. Evaluated in the meter wavelength range ofconductivity of cold plasma and the relative permittivity. In FEKO software environment,taking into account these data are simulated and studied loop and a straight rod PE. It wasfound that for positive values . r , loop PE provides more bandwidth than for negative values.The frequency range of the loop PE through a cold plasma is about four times larger in termsof VSWR <2 and three times - in terms of VSWR <5, than for the same emitter configurationof aluminum. When calculating the effective loop PE with positive values . r of PE efficiencyis 50-60%. For rod PE calculated efficiency does not exceed 20%.
Authors and Affiliations
V. Ovsyanikov, S. Moroz
Calculation of radio energy of Wi-fi signal in the railway coach
Introduction. Access to the Internet through mobile networks 3G, compared with other systems, has considerably lower cost of the implementation, and the best speed characteristics that makes its use more efficient. Moder...
Microstrip band-pass filter with dual tuning of working characteristics
Introduction. In recent years, there has been considerable interest in ferrite-piezoelectric composites for dual magnetic and electric field tunable microwave devices, such as resonators or filters. In this article a mic...
The analisis of linear systems in basis of Walsh-Hadamard transformation
The algorithm for solution of differential equations of liner systems in basis of trans-formation is Walsh-Hadamard suggested.
Research of the potential characteristics of a radar signal with linear frequency modulation in the area of low correlation
The composite radar signal with linear frequency modulation is reviewed. The results of calculations of potential descriptions of signal are resulted for correlation functions are got and contours in the area of low corr...
The modified process optimization method the quality assurance of REE at a manufacturing stage
Introduction. The process optimization method of the manufacturing of radio-electronic equipment, based on using of optimizing Pareto-planes is offered. Main part. Proposed method involves the using of optimization Pare...