Performance Studies on diesel Engine Stabilized with TBC and Glycine Max Blended Oil
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 2
Abstract
These days, thermal barrier coatings are gaining remarkable attention among researches owing to their wide applications and impact on several critical performance parameters of an engine. This throws light on the experimental investigation of a thermal barrier coated (TBC) piston crown in an engine imbibed with Glycine Max (Glycine Max) oil blended diesel engine. A comparative study was done on the engine with and without TBC. For this, Yittria Stabilized Zirconia was plasma sprayed as the TBC on the top of the engine piston, cylinder heads and even on the valves. Due to the presence of TBC it was observed that the heat transfer was minimized to a very high percentage. The blending ratio of the oil was varied from 10% -50% in order to study the critical performance variables and CO, HC, NO and CO2 emissions. By incorporating Yittria Stabilized Zirconia as a piston coating and fuel as soya bean oil the mechanical, brake thermal efficiency, indicated thermal efficiency and volumetric efficacies were enhanced remarkably and fuel consumption was drastically reduced
Authors and Affiliations
J. KISHORE, R. MEENAKSHI REDDY, P. HARI SHANKAR, E. SIVA REDDY
Keywords
Related Articles
- EP ID EP347080
- DOI 10.24247/ijmperdapr201814
- Views 98
- Downloads 0
Development and Optimization of Experimental Data based Models for Bamboo Sliver Cutting by using Human Powered Flywheel Motor
This paper presents the development of the experimental data based mathematical models for cutting the slivers from bamboo by means of human powered flywheel motor. There were various dependent and independent variables...
Performance Evaluation of Solar Cooker Made from Locally Sourced Materials
This study describes the development and performance evaluation of a four reflector solar cooker, which was made from locally sourced materials. Teak wood was used in the construction of the solar box cooker with the dim...
Buckling of Cones with Imperfect Length Subjected to Axial Compression
The paper considers the effect of imperfect length on the buckling behavior of mild steel truncated cone subjected to axial compression. The contact interaction problem between the rigid plate and the cone was successful...
PHYSICAL SIMULATION FOR HOT ROLLING POLICY OF ELECTRICAL SI–STEELS
The present work is dealing with three Si-steel alloys. Representative samples were taken and machined from the as- cast ingots to suite the thermo mechanical simulator. The physical simulation process consists of heatin...
The Realization of Thin Sheets Stamping Tools With an Economical Material
Given the complexity of manufacturing (machinability) and the analysis of the design parameters of the stamping tools that influence the time, cost and quality of production, we attempted to focus search on an economic m...