PFC Control for LED Lamp Driver Using Sensorless Predictive Current Controller
Journal Title: Engineering, Technology & Applied Science Research - Year 2018, Vol 8, Issue 5
Abstract
Light-emitting diodes (LEDs) have recently become of utmost significance to replace conventional lighting sources. Power factor correction (PFC) control of LED lamps requires three sensors which cause more cost, increase time delay, and increase noise, thus reducing drive reliability. Alternative methods to estimate the inductor current instead of its measurement are mandatory. This paper proposes a sensorless predictive current controller to enhance power factor (PF) of LED lamp driver and reduce driver cost. The inductor current is estimated instead of employing current sensor relying on measured input and output voltages. Zero-crossing detector is utilized to accomplish robust performance during distorted supply voltage. The controller and power circuit are isolated. The control algorithm employs a two-loop control to achieve a high PF with sinusoidal input current. Rapid speed performance is accomplished. The influences of PFC on input current value, PF and harmonic orders are presented. A prototype LED lamp driver with the suggested PFC structure is tested practically by a digital signal processor (DSP) DS1104 platform to validate its effectiveness. Experimental tests under various working conditions are provided to prove the usefulness of the suggested PFC control.
Authors and Affiliations
M. S. Zaky, H. Z. Azazi, E. Touti
Keywords
Related Articles
- EP ID EP239356
- DOI -
- Views 226
- Downloads 0
Ductility Evaluation of Steel Structures with Reduced Beam Sections and Post-Tensioned Cables Using the Finite Element Method
Given the importance of structure strengthening, this research introduces a particular type of steel structure in which the reduced beam section and post-tensioned cables were used for creating centralized property and p...
Correlation Between Grain Size Distribution and Silicon and Oxygen Contents at Wadi Arar Sediments, Kingdom of Saudi Arabia
Quartz is the major mineral of Wadi Arar sediments. The top two elements contents are oxygen with 63.96 wt%, followed by silicon with 16.35 wt%. There is a positive, weak to medium correlation between grain size and sili...
Mitigating the Adverse Impact of Un-Deterministic Distributed Generation on a Distribution System Considering Voltage Profile
Electric power systems are enforced to operate near to their stability limit due to the fast increase in power demand. Therefore, voltage stability has become a primary concern. The main cause of voltage variations is th...
A Novel 2D Z-Shaped Electromagnetic Bandgap Structure
This paper researches a novel 2D Z-shaped Electromagnetic Band-Gap (EBG) structure, its dispersion diagram and application field. Based on a transmission line model, the dispersion equation is derived and theoretically i...
A Modular Cascaded Multilevel Inverter Based Shunt Hybrid Active Power Filter for Selective Harmonic and Reactive Power Compensation Under Distorted/Unbalanced Grid Voltage Conditions
In recent years, shunt hybrid active power filters are being increasingly considered as a viable alternative to both passive filters and active power filters for compensating harmonics. In literature, their applications...