Physical-chemical regularities of steel refining from non-metallic inclusions
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 89, Issue 1
Abstract
Using the thermodynamic analysis, the possibility of a colloid interaction of the dispersed phase with a dispersed medium, the possibility of coagulation of the non-metallic phase, has been determined. It is established, that on the surface of a particle of nonmetallic inclusions metal films (layers) are formed that “wet” them and prevent further coagulation and removal of the non-metallic phase. It has been determined, that in order to prevent the effect of “wetting” by these films (layers), it is necessary to create mixing in the tundish. Based on the theoretical principles of removing non-metallic inclusions, a physical modeling of the hydrodynamic processes occurring in the tundish, has been carried out. These studies have made it possible to establish, that the most effective structure of streams is a vortex, which is formed by the introduction of a reaction chamber. For confirmation of theoretical conclusions and results of physical modeling, industrial tests were conducted to determine the contamination of the metal by the non-metallic inclusions. The test results correspond well with the data of physical modeling and theoretical conclusions.
Authors and Affiliations
Veronika Yefimova, Tatyana Pilipenko
Technological conditions of diffusive boride coating formation on silicon carbide and molybdenum disilicide
Basic directions of the diffusive boride coating formation on reaction-sintered silicon carbide and molybdenum disilicide are described. Technological conditions of non-metal ceramic materials boriding depending on the c...
Design model for determination of the fiber-reinforced concrete strength
Structural material that is able to solve complex problems in the toughest construction industry is dispersed reinforced concrete (reinforced concrete). This is composite-based cement matrix reinforced with fibers of var...
Improvement of the measurement accuracy of the support-rotary platform of the antenna system using mems accelerometers
The article is devoted to the research of errors arising from the influence of non-linear characteristics of MEMS gyroscopes, which appear at high angles deviation plane of the crystal sensor from horizontal surface, and...
Destruction zone near the tip of interfacial crack at a prevailing tensile loading
Under the plane strain conditions at the prevailing tensile loading by Wiener-Hopf method the solutions of problems about the calculation of a small-scale destruction zone in the pre-fracture zone part, which is adjacent...
Analysis of resonant inverter with parametric maintenance of load power
High-frequency voltage resonant inverters traditionally realize the functions of load voltage or current control and stabilization. But there is a wide application area which needs to stabilize a load power rather then i...