PLASTICITY OF SELECTED METALLIC MATERIALS IN DYNAMIC DEFORMATION CONDITIONS

Abstract

Characteristics of a modernized flywheel machine has been presented in the paper. The laboratory stand enables to perform dynamic tensile tests and impact bending with a linear velocity of the enforcing element in the range of 5÷40 m/s. A new data acquisition system, based on the tensometric sensors, allows for significant qualitative improvement of registered signals. Some preliminary dynamic forming tests were performed for the selected group of metallic materials. Subsequent microstructural examinations and identification of the fracture type enabled to describe a correlation between strain rate, strain and microstructure.

Authors and Affiliations

Jacek PAWLICKI, Kinga RODAK, Adam PŁACHTA

Keywords

Related Articles

METODA POMIARU CIŚNIENIA W UKŁADACH HYDRAULICZNYCH I PNEUMATYCZNYCH Z ZASTOSOWANIEM ŚWIATŁA LASEROWEGO

W pracy opisano metodę bezkontaktowego pomiaru ciśnienia z zastoso-waniem światła laserowego. Przedstawiono stosowane aktualnie rozwiązania dotyczące tego tematu. Podstawy teoretyczne proponowanej metody zaprezentowano w...

PROACTIVE STRATEGY MAINTENANCE

Given challenging competition of today service providers are required to be more proactive in satisfying the environmental conditions and customer needs. Proactive maintenance should start at the design stage with establ...

INFLUENCE OF TRAM LOAD ON DEFORMATIONS ELASTIC TRAM WHEEL ELEMENTS

In this article been identified impact loads of flexible tram`s wheel used in the tram Konstal 105 Na on the deformation rubber – elastic elements. In order to obtain this results we use analysis of the maximum displacem...

ORGANIZACJA WŁADZ ADMINISTRACJI TRANSPORTOWEJ W KRÓLESTWIE POLSKIM ZA RZĄDÓW GENERAŁA-MAJORA TENISZEWA

Artykuł analizuje prawny aspekt funkcjonowania zarządu służb komunikacyjnych w Królestwie Polskim w latach 1842-1854, czyli w czasach gdy formalnie podlegały one rosyjsko-tatarskiemu księciu Teniszewowi. Przedstawienie...

Download PDF file
  • EP ID EP131493
  • DOI -
  • Views 57
  • Downloads 0

How To Cite

Jacek PAWLICKI, Kinga RODAK, Adam PŁACHTA (2014). PLASTICITY OF SELECTED METALLIC MATERIALS IN DYNAMIC DEFORMATION CONDITIONS. Scientific Journals of Silesian University of Technology. Series Transport, 2014(83), 173-182. https://europub.co.uk/articles/-A-131493