POLYMER COMPOSITES IN FRICTION PAIR MACHINE
Journal Title: Tribologia - Year 2013, Vol 248, Issue 2
Abstract
In the article, the investigation results of the formation chemo- and thermo-setting composite on sliding bearings were presented. Composites of different chemical compositions were investigated. The influence of grease on the tribological characteristic phenol-formaldehyde composites are discussed. The results of the tribological processes that were conducted under different conditions of load and velocity are presented. After the experiments, an analysis of the influence of friction parameters and grease content in the composite on wear characteristics and temperature changes are determined.
Authors and Affiliations
Janusz T. Janecki, Jolanta Drabik, Zbigniew Pawelec, Marek Wolszczak
Keywords
Related Articles
- EP ID EP270352
- DOI -
- Views 45
- Downloads 0
INCREASING THE SERVICEABILITY OF FRICTION PAIRS BY APPLYING A:C:H AND A:C:H:W DLC COATINGS
The paper discusses the results of structural and tribological tests conducted for a:C:H and a:C:H:W DLC coatings deposited on Co- Cr-Mo specimens using the PACVD process. The structure and morphology of the Co-Cr-Mo sub...
DIFFRACTION MEASUREMENT OF RESIDUAL STRESSES IN TRIBOLOGICAL TESTS OF ELEMENTS COVERED WITH LOW FRICTION COATINGS
The aim of this article was to present the methodological assumptions of determining residual stresses in the surface layer of components undergoing tribological tests. The presented approach to residual stresses measure...
Badanie przemian chemicznych olejów smarowych wytwarzanych z udziałem surowców roślinnych
Produkty pochodzenia roślinnego stanowią bogate źródło związków o właściwościach przeciwutleniających. Przeprowadzono badania dotyczące składu i możliwości zastosowań tych produktów w technologii otrzymywania środków sma...
THE TRIBOLOGICAL RESEARCH OF MATERIALS FOR USE IN A MEDICAL TECHNIQUE
The paper presents the procedure for technological research of new materials to be applied in a medical technique, especially for hip joint implants. The subject of the research and analysis was the metal-polymer combina...
ANALYSIS OF WEAR AND TEAR OF WORKING ELEMENTS WITH A REPLACEABLE CUTTING EDGE IN AN ABRASIVE SOIL MASS
This paper presents an analysis of the wear and tear process of different technological solutions of plough blades with a replaceable cutting edge. The experiment was conducted under natural operating conditions. Workpie...