POSSIBILITY FOR STUDY OF THE RELUCTANCE SYNCHRONOUS MOTORS DYNAMIC REGIMES
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2011, Vol 35, Issue 35
Abstract
This paper presents a possibility for studying the dynamic regimes of the reluctance synchronous motors. There are detailed the mathematical model and the graphics obtained by simulation in certain dynamic regimes. The reluctance synchronous motors are permanently subdued to certain electrical and mechanical disturbances. These disturbances cause dynamic regimes which can finish by a new steady state, by a continuous regime of oscillations around the synchronism speed or by an unstable regime in which the synchronism is lost. As a consequence, the paper analyzes the influences of certain disturbances on the operation motor. The experimental stand used and the results obtained are also presented. Finally the main conclusions are emphasized: - the RSM is very sensitive to the parameters variation; it results, therefore, that the simulations are very important in the machine design. A design conceived without performing preliminary simulations, regarding the machine behaviour for different values of the parameters, is a mistake. - the RSM has got a different behaviour over different values of the torque shock, at the same inertia moment; - the synchronism loss is conditioned by the value of the torque shock applied to it; - the dynamic stability decreases at the same time with the supply voltage decrease (when the decrease is under a certain limit, the synchronism is lost); - the previous conclusions emphasize the fact that the RSM static stability is dependent both on the disturbance magnitude and character and on the initial conditions; - with the help of some simulations like the ones presented before it is possible to establish the dynamic stability limit for each RSM, which is an important work instrument for the designers of such type of motors.
Authors and Affiliations
Monica-Adela ENACHE, Ioan CAUTIL
Modeling Three-Phase Short-Circuits for Radial Distribution Systems
Monitoring radial distribution systems in shortcircuit conditions represents a quite important issue of electric power networks supplied by renewable sources. The method presented in the paper aims to establish in labora...
RESONANT SOURCE FOR THE SUPPLY OF ELECTRIC FIELD PROBE CALIBRATION SYSTEM AT FREQUENCIES BETWEEN 50Hz AND 50KHz
Electromagnetic environmental conditions checking and provision regarding long and short time human personal and occupational exposure is regulated by international standards. Generally, the human being is exposed mainly...
“OPEN-ENDED LABORATORY” METHOD APPLIED IN THE CONCEPTION OF A TEST BENCH TO SIMULATE A DIESEL - ELECTRIC TRANSMISION
This paper describes the application of a creative method (open-ended laboratory) in a research team work, to create an experimental bench which could be used, with various objectives, in the study of Electrical Machines...
Diagnosis with Analytic Model of a Rectifier for Faults of the Rectifier Control
The diagnosis of the electric systems is an actual item for the specialists in domain. Due to the variety of the measurements and multiplicity of faults which can be analyzed, the approach is motivating. The model reprod...
A Geometrical and Numerical Study of the Main Sizes of the Lotka-Volterra Models
The blend of geometry and numerical analysis that is taking place in the present material produces a subject with can gives a lots of detail and richness for the case of dynamical models arising in mathematics, scienc...