Potentials of Increasing Levels of Recycled Waste Plastic on the Physical Characteristics of Concrete

Journal Title: Journal of Civil Engineering and Environmental Sciences - Year 2018, Vol 4, Issue 2

Abstract

This research focused on the integration of waste plastic into concrete in a bid to restrain water ingress when exposed to water. Polyethylene water sachet (PWS) was the source of waste plastic used. Waste plastic concrete treatments were designed and cast successfully with percentage waste plastic contents of 0, 0.25, 0.50, 0.75 and 1.00. It also involved a constant water/cement ratio of 0.45, a mix design of 1:2:4 and 2% by 342.85kg cement weight of superplasticizer. Twenty cubes, 20 beams and 45 cylindrical specimens were cast for compressive, flexural, split tensile and water absorption tests respectively at 28 days of curing. Waste plastic treatments of 0.5% and 0.75% contents had the highest compressive strength. Water absorption characteristics of waste plastic concrete dropped with increasing plastic waste content to 0.75% after which further increase gave undesirable effects. Optimum water absorption (impermeability) were observed between 0.50% and 0.75% waste plastic content. Waste plastic concrete of 0.75% content with compressive strength and water absorption values of 21.19MPa and 0.22% respectively met the requirements of ASTM C55-11, ASTM C139-11 and CP 102. Waste plastic concrete showed desirable characteristics for potential use in the built environment.

Authors and Affiliations

CA Ogbu, AY Sangodoyin

Keywords

Related Articles

Potentials of Increasing Levels of Recycled Waste Plastic on the Physical Characteristics of Concrete

This research focused on the integration of waste plastic into concrete in a bid to restrain water ingress when exposed to water. Polyethylene water sachet (PWS) was the source of waste plastic used. Waste plastic concre...

A Survey of Solid Waste Management in Chennai (A Case Study of Around Koyambedu Market and Madhavaram Poultry Farms)

The well managed successful waste management programme increases the health and environmental quality of the country. This survey examines the status of Solid Waste management at metropolitan city, Chennai, Tamil Nadu (K...

User Response – Based Sustainable Solutions to Traffic Congestion Problem using Public Transport: The Case of Uttara, Dhaka

For a country of millions, traffic congestion significantly reduces the economic productivity. This statement holds true for most urban areas of the world, especially Dhaka, the mega-city of Bangladesh. An area of Dhaka...

Comparative analysis of collapse loads of slabs supported on orthogonal Sided frames with beam/column joint fixed

This research evaluates the collapse loads of slab supported on orthogonal sided frames with beam/column joint fixed. Two frame models were investigated (one with moment of resistance of slab (MRS) > moment of resistance...

Experimental Study of Impact of Foul Release with Low Surface Energy on Ship Resistance

A comparison between coating frictional resistances of several ship hulls has been conducted by experimental studies (Foul Release and conventional paint) in the unfouled conditions in Hydrodynamic open water tests in a...

Download PDF file
  • EP ID EP534968
  • DOI 10.17352/2455-488X.000028
  • Views 51
  • Downloads 0

How To Cite

CA Ogbu, AY Sangodoyin (2018). Potentials of Increasing Levels of Recycled Waste Plastic on the Physical Characteristics of Concrete. Journal of Civil Engineering and Environmental Sciences, 4(2), 50-55. https://europub.co.uk/articles/-A-534968