Power System Restoration with Black-Start Pump Storage Power Plants
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2014, Vol 21, Issue 3
Abstract
One of the main duties of a transmission system operator (TSO) is to be prepared for the power system worst case, which means to restore the power system operation after a total blackout. To this aim two main principles are currently available. The first one is based on power system restoration with external voltage support and the second more challenging one is based on own voltage support from black-start generation units. The current paper describes experiences of power system restoration based on detailed dynamic system modelling and tested in the real system by interconnecting for the first time two hydro-power generation centers over the Alps and also by using as load the currently worldwide largest voltage source full converter-driven-pump of 100 MVA.
Authors and Affiliations
Walter Sattinger
Keywords
Related Articles
- EP ID EP461484
- DOI -
- Views 52
- Downloads 0
Electrical Field Distribution Analysis on Human Be-ing Placed under High Voltage Lines
The paper presents the interaction between electric field of a high voltage line and the body of a human being placed near the line, for normal situation, when human being is placed on the ground or in accidental situati...
Rotation and Radiation Effects on MHD Flow through Porous Medium Past a Vertical Plate with Heat and Mass Transfer
Effects of rotation and radiation on unsteady MHD flow past a vertical plate with variable wall temperature and mass diffusion in the presence of Hall current is studied here. Earlier we studied chemical reaction effect...
Improving Compensation Performance in Three-Phase Active Power Line Conditioners by DC-Voltage Control
This paper analyses the influence of the prescribed DC-link voltage on the filtering efficiency, in terms of current harmonic distortion after compensation, in a three-phase three-wire shunt active power line conditioner...
Some Aspects Regarding the Use of Digital Signal Controllers in Electrical Drivers for Stepper Motors
In the first part of this paper are presented and compared two practical implementation of unipolar stepper drives for didactical destination, one with 8 bit microcontroller and one with 16 bits digital signal controller...
Influence of the Fusing Process on the Wear and Corrosion Properties of NiCrBSi-Coatings
In this study the NiCrBSi feedstock powder was deposited by flame spraying on to C45 steel substrate. After spraying the coated material was differently fused at 1000°C. The microstructure evolution respectively the phas...