POWERFUL GENERATORS OF HIGH-VOLTAGE PULSES WITH NANOSECOND FRONTS
Journal Title: Електротехніка і Електромеханіка - Year 2018, Vol 0, Issue 1
Abstract
Purpose. Purpose of the article is to show the possibility of joint efficient operation of semiconductor switches and spark arresters in high-powerful high-voltage generators for obtaining nanosecond and shorter pulse fronts on a high-voltage load. Methodology. The variants of generators of power high-voltage pulses with semiconductor switches in the form of IGBT-transistors, SOS-diodes and spark dischargers as pulse front peaking spark gaps are considered. A scheme is proposed for such a generator of high-voltage pulses with nanosecond front on the basis of a linear pulsed transformer in the Tesla scheme. Results. On the complex load of the generator in the form of a serial connection of a gas bubble in water with a discharge in it and a layer of water under the bubble, voltage pulses with an amplitude of 23 kV and current pulses with an amplitude of 15 A were obtained. In this case, the pulse front, both voltage and current, on the levels 0.1-0.9, was approximately 10 ns, and the repetition rate of pulses in the load ranged from 1200 to 5000 pulses per second. Originality. A scheme is proposed for a generator of high-voltage pulses with a nanosecond front. The difference of the proposed genera-tor with a nanosecond front, high pulse repetition rate, using its high-voltage and low-voltage circuits in the discharge circuit, is the pres-ence in its composition of a linear pulse transformer and a system of peaking of pulse front using SOS diodes and spark gaps. Practical value. These generators considered in this work can find wide application in high-voltage technologies, including decontaminating water treatment, water purification by electric discharges.
Authors and Affiliations
N. I. Boyko
Keywords
Related Articles
- EP ID EP485185
- DOI 10.20998/2074-272X.2018.1.09
- Views 89
- Downloads 0
ESTIMATING THE LIMIT POSSIBILITIES OF THE STEP CHARGING SYSTEM FOR CAPACITIVE ENERGY STORAGE
The aim of the article is to estimate the limit possibilities of step-by-step charging the capacitive energy storage which are caused by the achievement of a balance among the processes of the receiving and losing of ele...
NETWORK-CENTRIC TECHNOLOGIES FOR CONTROL OF THREE-PHASE NETWORK OPERATION MODES
Purpose. The development of the control system for three-phase network is based on intelligent technologies of network-centric control of heterogeneous objects. The introduction of unmanned aerial vehicles for monitoring...
RESEARCH INTO METHODS OF PIPE END DEMAGNETIZATION UNDER MAIN PIPELINE REPAIR
Efficiency of pipe end demagnetization methods is experimentally investigated to avoid arc magnetism at repair welding jobs on main pipelines. It is found that multi-polar biased static and dynamic demagnetization provid...
A METHOD OF COMPLEX AUTOMATED MONITORING OF UKRAINIAN POWER ENERGY SYSTEM OBJECTS TO INCREASE ITS OPERATION SAFETY
The paper describes an algorithm of the complex automated monitoring of Ukraine’s power energy system, aimed at ensuring safety of its personnel and equipment. This monitoring involves usage of unmanned aerial vehicles (...
POWERFUL GENERATORS OF HIGH-VOLTAGE PULSES WITH NANOSECOND FRONTS
Purpose. Purpose of the article is to show the possibility of joint efficient operation of semiconductor switches and spark arresters in high-powerful high-voltage generators for obtaining nanosecond and shorter pulse fr...