Prediction of Surface Roughness and Optimization of Machining Parameters in Drilling Process of Aluminum Alloy Al6061
Journal Title: International Journal of Trend in Scientific Research and Development - Year 2020, Vol 4, Issue 3
Abstract
In this paper, an experimental research was conducted to investigate the influence of the tool diameter, spindle speed, and feed rate on the surface roughness in hole drilling process. The Box Behken experimental matrix that was used with 15 experiments. The Minitab 16 software was used to evaluate the experimental results. The analyzed results showed that the spindle speed was a parameter that has the most important influence on the surface roughness. The second factors that affect on the surface roughness was tool diameter. And, the feed rate was the factor that has smallest effect on the surface roughness. The interaction factor between the tool diameter and the feed rate has the largest degree of the influence on the surface roughness, the second interaction factor that influenced on the surface roughness was the interaction between the diamter and the spindle speed. The interaction between the spindle speed and the feed rate has the smallest effect on the surface roughness. The suitable regression model of surface roughness is quadractic function. The predicted results of surface roughness are very close to the experimental values of that one. The genetic algorithm was used to find the optimal value of surface roughness. In this study, the optimum value of surface roughness was obtained for each case of drill tool diameter. The optimized cutting parameters was applied to improve the surface roughness with very satisfactory results. The optimum value of surface was quite small. Nguyen Hong Son | Nhu-Tung Nguyen "Prediction of Surface Roughness and Optimization of Machining Parameters in Drilling Process of Aluminum Alloy Al6061" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30193.pdf Paper Url :https://www.ijtsrd.com/engineering/mechanical-engineering/30193/prediction-of-surface-roughness-and-optimization-of-machining-parameters-in-drilling-process-of-aluminum-alloy-al6061/nguyen-hong-son
Authors and Affiliations
Nguyen Hong Son | Nhu-Tung Nguyen
Keywords
Related Articles
- EP ID EP686153
- DOI -
- Views 87
- Downloads 0
Honeypot Methods and Applications
Day by day the internet is becoming an essential part of everyone’s life. In India from 2015 – 2020, there is an increase in internet users by 400 million users. As technology and innovation are increasing rapidly. Secu...
The Review of Energy Efficient Network
Energy consumption is a primary concern in design and operation of wireless communication networks based on environmental concern and cost. The coming 5G network proposes better data rates but also speaks about energy ef...
MIMO-OFDM's BER and Design Performance for Wireless Broadband Communications
To get high data rates, speed and immediate amplify in range and reliability without consuming more radio frequency require MIMO-OFDM for wireless broadband communication. In this paper, we investigate the performance of...
Knowledge Management in Educational Institutes with the Help of Digitalization
Knowledge can be termed as an output of information analysis. It is further classified as explicit and tacit knowledge. The amount of knowledge generated in Educational Institutes is considerably huge. Every Educational...
Design and Fabrication of Economical Air Filter
The most general problem of today's environment is the presence of dust. The dust stability in air will lead to instability in human routine in the form of health disorders. The filtration of this kind of impurities from...