Preliminary Investigation Concerning Monitoring of Water Pollution Level
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 1
Abstract
The aim of this paper is to develop an effective tool based on artificial intelligence techniques for monitoring and characterization of surface waters. Monitoring of the pollution in the aquatic environment consists in the recording of the concentrations of different chemical compounds from water, compounds that exceed the limits of maximum concentrations allowed by the regulations in force. From the chemical point of view, the quality of aquatic environment is determined by analytical control, followed by storing the results of laboratory analysis and creation of a database in order to ensure the optimal conditions for life and reproduction of aquatic organisms. The expert system will use the multitude of data obtained, allowing finally the improvement of methods for interpretation of physical and chemical parameters according to European legislation in force. This improvement can be achieved by AI algorithms.
Authors and Affiliations
Daniela Ecaterina COSOR (RUSU), Constantin GHEORGHIEȘ, Viorel MUNTEANU
Keywords
Related Articles
- EP ID EP658787
- DOI -
- Views 76
- Downloads 0
The Influence of Waste Water Composition on the Pumping System Corrosion
Wastewater piping systems in urban agglomerations or industrial areas have problems with the wear and tear of equipment and water transport pipelines used. The problems are related to hydromechanics wear and corrosion du...
A Possibility to Decrease the Sintering Temperature of Corundum Ceramics
The ceramics consisting of more than 95%Al2O3 is called corundum ceramics. The name comes from the name of the α-crystalline form of the aluminum oxide - corundum. The basic technological process influencing the properti...
Study Regarding Gravimetrical Corrosion of the Superficial Layers Obtained through Electrical Discharge
The experimental research was made on superficial layers laid-down through electrical sparking on the steel carbon OLC 45 probes, the used electrode being made from a corrosion resistant material (Copper). The probes was...
Modelling by Finite Element Analysis Method of Stress State Establishing for an Steel Alloy
The paper presents some results about the tension state in samples subject to pure bending fatigue process. Numerical simulation based on finite element method was used. The tension field induced by a vertical deformatio...
Study on the Rheology of Corn Oil Subjected to Forced Oxidation
This paper reflects a study on the rheology of corn oil in unoxidized state, subjected to forced oxidation treatment. Using the Rheotest2 system, the variation of dynamic viscosity with temperature and shear rate, using...