Preliminary Study on Treatment of Palm Oil Mill Effluent by Sand Filtration-Dielectric Barrier Discharge System
Journal Title: Journal of Engineering and Technological Sciences - Year 2016, Vol 48, Issue 1
Abstract
In the palm oil industry, open ponding, aerobic and anaerobic digestion, physicochemical treatment and membrane filtration are generally applied as conventional treatments of palm oil mill effluent (POME). In this study, a sand filtration-dielectric barrier discharge (DBD) system was investigated as an alternative process for treating POME. This system can reduce land usage, processing time and costs compared to conventional systems. The removal efficiency of chemical oxygen demand (COD), biological oxygen demand (BOD5), and oil-grease in relation to the applied voltage were studied. Furthermore, the pH and temperature profiles were investigated. The obtained results indicate that the removal efficiency of COD, BOD5, and oil-grease increased with an increase of the applied voltage. The electrical energy consumption needed is about 10.56 kWh/L of POME.
Authors and Affiliations
Ariadi Hazmi, Reni Desmiarti, Eka Putra Waldi, Primas Emeraldi
Keywords
Related Articles
- EP ID EP203735
- DOI 10.5614/j.eng.technol.sci.2016.48.1.3
- Views 142
- Downloads 0
The Distribution of Microalgae in a Stabilization Pond System of a Domestic Wastewater Treatment Plant in a Tropical Environment (Case Study: Bojongsoang Wastewater Treatment Plant)
The Bojongsoang Wastewater Treatment Plant (WWTP) serves to treat domestic wastewater originating from Bandung City, West Java, Indonesia. An abundant amount of nutrients as a result of waste decomposition increases the...
Potential of Reinforced Indonesian Glulam Beams Using Grade I (Bengkirai), Grade II (Kamper), Grade III (Nyatoh) Woods for Use in Structural Wood Design
Wood is a natural resource that is renewable and available in various species in tropical countries. Its abundancy in nature makes it easy to obtain, thus making it a nature friendly material for use in construction. Ind...
Study of Hall Effect Sensor and Variety of Temperature Related Sensitivity
Hall effect sensors are used in many applications because they are based on an ideal magnetic field sensing technology. The most important factor that determines their sensitivity is the material of which the sensor is m...
The Effect of Element Types on Force Analogy Method Analysis
In this study, the seismic performance of a 2D portal frame subjected to the recorded seismic ground motions of the Northridge 1994 earthquake was evaluated by the force analogy method (FAM) with different element types....
An Analysis of the Effect of the Implementation of an Integrated Management System (IMS) on Work Ergonomics in an O&M Power Plant Company
Ergonomics has developed significantly for the prevention of related accidents. Its implementation, however, depends on the existing management system within a company. The integrated management system (IMS) is frequentl...