Premises in the Design of Computational Algorithms for Refining Slags Applied in Ladle Treatment of Steels. Influence of BOF Slag and of Other Sources of Slag
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2013, Vol 36, Issue 3
Abstract
In the design of computational algorithms for refining slags for ladle treatment of steels, the evaluation of contributions of different factors is a definitory step, allowing to evaluate the real posibilities and limitations in steel refining practice. Slag carried over from steelmaking converters to the ladle is evaluated from the point of view of contributions of its amount and contents of SiO2 and iron oxides. It is shown in quantitative manner what it happens in conditions of variations of the above mentioned factors, in the ranges of values closed to real industrial practice. It is shown and concluded that quantitative evaluations of the contributions of slag carried over in refining ladle are of outmost importance. It is possible, under the above mentioned conditions, to ensure adequate values of sulphide capacity, low residual values of iron oxides in economical conditions and to save aluminium from the exaggerate loss by oxidation.
Authors and Affiliations
Petre Stelian NIȚĂ
Keywords
Related Articles
- EP ID EP596073
- DOI -
- Views 76
- Downloads 0
Study of Severe Plastic Deformation by Torsion Test
High Torsion Pressure (HPT) is an advanced tool for inducing very significant grain refinement in a wide range of metals. In this research were studied parameters of severe plastic deformation using the torsion test. The...
Theoretical Study Regarding the Flow Conditions for Alloys through Thin Channels
A common tool used to demonstrate the phenomenon of movement of liquids through thin channels is the capillary tube. When the lower end of the tube is placed vertically in a liquid (such as water), it forms a concave fil...
Surface Tension of Liquid Copper in Dilute Oxygen Concentrations
The studies of this paper regarding the influence of low oxygen contents on the liquid copper surface tension had as base „sessile drop” method and the determination of the oxygen content using calculation ratio where pa...
Sanitary Silicone Used to Make Small Art Cast Parts
Also known as investment or precision casting process, the “lost wax process” was used in ancient times from China to Egypt to cast exquisite objects which are now displayed as artifacts in museums. The process is called...
Effect of Thermophysical and Mechanical Properties of the Substrate on the Normal Adhesion of Ni-Cr-Fe Coatings Deposited by Thermal Spray
Thermal spray process is used to obtain high quality coatings that improve corrosion resistance, mechanical and tribological properties, in various technical applications: auto parts, turbine elements, in the naval indus...