PREPARATION AND CHARACTERIZATION OF CATALYST FOR REDUCTION AMINATION OF ETHANOLAMINE BY DIFFERENT METHOD

Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1

Abstract

The NiO-CuO-CaO/Al2O3 composite oxide catalyst was prepared by impregnation method, CO-precipitation method and grinding microwave method with Al2O3 as carrier, Ni-Cu bimetal as active component and Ca as additive. And their performances were characterized by XRD, SEM, BET and IR. The results show that impregnation method is a suitable method for the preparation of composite oxide catalyst, and the WNiO:WCuO:WCaO =15:3.5:2.0 is determined by EDS analysis. The relatively large BET specific surface areas of 22.08 cm2/g and 31.72 cm2/g can be obtained by impregnation and microwave grinding, separately, while the CO-precipitation yield is only 2.49 cm2/g. The BJH pore volume of the composite oxide obtained by the above three methods is not very different. The BJH pore size of the composite oxide obtained by impregnation is 2.070 nm, which is relatively small, in theory, it is more suitable for the catalytic reaction of ethanediamine from ethanolamine by reduction amination

Authors and Affiliations

Li Xin, Wang Huan, Liu Li-Ye, Zhang Ji-Bo, Qiu Jun

Keywords

Related Articles

ANAEROBIC DIGESTION OF PULP

Alkaline pulping produces a large amount of black liquor and volatile substances, such as methanol, dimethyl sulfide, terpene, ketone, etc. It can cause serious pollution of water and air. Anaerobic inhibition with ligni...

IDENTIFICATIONS ON PURE AND FAKED PEARL LAYER POWDER USING X-RAY DIFFRACTION AND ELECTRON SPIN RESONANCE

The high-grade commercially available pearl layer powder (CAPLP, 80 yuan a bottle) and the cheap street pearl powder (CSPP, 10 yuan a bottle) were investigated using X-ray diffraction (XRD) and electron spin resonance (E...

FINITE ELEMENT ANALYSIS OF DOUBLE WEDGE ANGLE RING FLANGE JOINT UNDER BENDING MOMENT

Industrial equipment is going to take a turn for the higher parameter and larger scale. It raise taller requirement to the reliability of the sealing structure. So, the new sealing structure has been paid more and more a...

PURIFICATION OF ANTHOCYANINS FROM FRUIT OF ARONI AMELANOCARPA

Five different macroporous resins were evaluated for the adsorption properties of the anthocyanins extracted from the Aroni amelanocarpa fruit. The effects of initial anthocyanin concentration, amount of elution solvent,...

A NEW SINGLE-COMPONENT CA20AL26MG3SI3O68:DY3+, EU3+ POTENTIAL PHOSPHOR FOR WHITE-LIGHT EMITTING DIODES: LUMINESCENCE PROPERTIES, ENERGY TRANSFER AND MULTICOLOR LUMINESCENCE

In this study, novel single-component Ca20Al26Mg3Si3O68:Dy3+, Eu3+ phosphor has been successfully prepared by high temperature solid state reaction. The crystal structure, luminescent property, energy transfer and multic...

Download PDF file
  • EP ID EP414556
  • DOI 10.26480/icnmim.01.2018.239.242
  • Views 35
  • Downloads 0

How To Cite

Li Xin, Wang Huan, Liu Li-Ye, Zhang Ji-Bo, Qiu Jun (2018). PREPARATION AND CHARACTERIZATION OF CATALYST FOR REDUCTION AMINATION OF ETHANOLAMINE BY DIFFERENT METHOD. Topics in Chemical & Material Engineering (TCME), 1(1), 239-242. https://europub.co.uk/articles/-A-414556