Preparation and physical properties of sand base paste filling materials

Journal Title: Science Paper Online - Year 2012, Vol 7, Issue 2

Abstract

Sand base paste filling materials were prepared using sand and furnace bottom ash as the main raw materials. The relations of their liquidity, compressive strength and other properties with the ratio of raw materials for the filling materials were investigated. The results show that naphthalene superplasticizer increases the slump and causes the slump loss, which needs to use a composite with wood calcium superplasticizer to achieve the filling process for meeting the liquidity requirements. The optimization formulation ratio of filling materials was obtained by orthogonal test.

Authors and Affiliations

Bin Lü, Zhenjun Zhou, Weihua Luo

Keywords

Related Articles

Hydrolysis of cassava dregs with dilute sulphuric acid and its application for immobilized butyric acid fermentation

Hydrolysis of cassava dregs with dilute sulphuric acid and its application for immobilized butyric acid fermentation

活性碳纤维表面硝酸-铁(Ⅲ)改性<br /> 对乳酸菌固定化的影响<br />

采用HCl、H2SO4、HNO3和FeCl3溶液分别对活性碳纤维进行表面改性,考查改性前后活性碳纤维表面酸性含氧官能团和表面元素含量变化,以及作为乳酸菌固定化载体的单丝菌膜生长情况。结果表明:经HNO3和H2SO4改性后,活性碳纤维表面酸性含氧官...

Oxidation of anthracene by phthalic anhydride modified laccase

Laccase is modified with phthalic anhydride in order to improve its stability against high temperature and acidic pH in this paper. The modification ratio of amino lysine groups of laccase is determined as 63.8% using TN...

Synthesis and characterization of a low-molecular-weight organogelator containing anthraquinone imide

A sugar-based organogelator containing electrochromic anthraquinone imide, N-(4-phenyl-2,3,4,6- tetraacetyl-β-D-glucosyl)- anthraquinone 2, 3-dicarboxylic imide (AGC), has been designed and synthesized. With spectroelect...

Ni/SBA-15/Al2O3/FeCrAl金属基结构化<br /> 催化剂及其催化性能研究<br />

以FeCrAl合金薄片(厚度为0.05mm)为基材,Al2O3浆料为过渡层,不同Ni含量的Ni/SBA-15催化剂浆料为涂层,制备了Ni/SBA-15/Al2O3/FeCrAl金属基结构化催化剂,采用XRD和TPR表征了催化剂的结构,并对甲烷二氧化碳重整制合成气的催化反应进行...

Download PDF file
  • EP ID EP86650
  • DOI -
  • Views 83
  • Downloads 0

How To Cite

Bin Lü, Zhenjun Zhou, Weihua Luo (2012). Preparation and physical properties of sand base paste filling materials. Science Paper Online, 7(2), 107-110. https://europub.co.uk/articles/-A-86650