Preparation of Cage Nanoporous Silica and Its Application in Chromatographic Fillers
Journal Title: Nanoscience and Nanotechnology - Year 2017, Vol 1, Issue 1
Abstract
In this paper, the cage nanoporous silica is composed of ethyl orthosilicate as silicon source, triblock copolymer poly (ethylene oxide) -poly (propylene oxide) -polyethylene oxide (F127) as structure guide agent and additive, while the Fm3m cubic structure of cage type nanoporous silica was prepared by hydrothermal synthesis method. It is easy to control the self-assembly of the silica triblock copolymer intermediates thermally. In addition, the change in sample pore size and pore volume can be achieved by a hydrothermal reaction at a temperature of 100 ° C to 150 °C. Small angle X-ray diff raction shows that these samples have ordered pores, while adsorption studies show that they have high porosity, uniform distribution of bimodal pores and large pore volume. Use separation of p-methylbenzene borate, iodobenzene and biphenyl by using three kinds of cage-type nanoporous silica materials as chromatographic fillers. The results showed that the material prepared at 130 ℃ under hydrothermal condition had the best effect on the separation of three organic compounds.
Authors and Affiliations
Hongyan Liang,Lili Hu,Xiaoxiao Jin,Shanyue Yang
Keywords
Related Articles
- EP ID EP678909
- DOI -
- Views 190
- Downloads 0
Application of Nanotechnology in Post-treatment of Automobile Tail Gas Nitrogen Oxides
Nano-catalyst has a very high catalytic activity and has a good prospect in automobile exhaust gas purification. This paper summarizes the research status of nano-scale automobile exhaust gas purification catalytic mater...
Arithmetic relaxation time of induced polarization fractal dimension for characterizing Shajara Reservoirs of the Shajara Formation
Aim: Sandstone samples were collected from the surface type section of the Shajara Formation of the Permo-Carboniferous Unayzah Group for detailed reservoir characterization. Capillary pressure experiment was performed t...
Research article for journal of nanoscience and nanotechnology
Aim: In the present study, I have investigated the effect of different annealing time durations of 0.5h, 1h, 2h and 4h (annealing temperature at 700 oC) on the electrical, micro structural and superconducting properties...
Synthesis of 2,3-dihydroquinazolin-4(1H)-ones catalyzed by Perchlorated Zirconia (HClO4/ZrO2) nanoparticles as a novel solid acid catalyst
Aim: Zirconia was synthesized in nanosize by sol-gel method and perchlorated zirconia (HClO4/ZrO2) with various calcination temperatures were prepared and characterized by XRD, FTIR and SEM techniques. The catalyst acidi...
Designing paste thickeners for copper flotation tailings, using bed depth scale-up factor
Aim: The paste thickener could increase the water recovery and reduce the environmental impacts in tailings dam. The present work aimed to find the appropriate scale-up factor for bed depth to design paste thickener for...