PRINCIPLES OF MEASUREMENT OF OPTICAL RADIATION AT WORK PLACES
Journal Title: Proceedings of Electrotechnical Institute Prace Instytutu Elektrotechniki - Year 2012, Vol 59, Issue 255
Abstract
This paper presents the requirements for the method and extent of testing of non coherent optical radiation at work places as well as the meters used for tests. The requirements are based on the current standards in the field of optical radiation. The scope of the exposure measurements are presented in conjunction with the current values of MDE. There is a description of the method of determining the angular dimension of radiation source α and how to calculate the effective source radiance from the measured effective irradiance. At the end, the paper presents the recommended frequency of testing and suggestions concerning the content of the study.
Authors and Affiliations
Andrzej PAWLAK
WZORCOWANIE KOLORYMETRÓW TRÓJCHROMATYCZNYCH
W artykule scharakteryzowano zagadnienia związane z wzorcowaniem kolorymetrów trójchromatycznych do pomiaru chromatyczności źródeł światła. Przedstawiono dwa przykładowe kolorymetry trójchromatyczne. Opisano algorytm adi...
ASSESSMENT OF DYNAMIC MODELLING AS A TOOL FOR AN ELECTRICITY CONSUMPTION FORECASTING FOR A GROUP OF INDIVIDUAL CUSTOMERS
The forecasting of the electricity consumption is an indispensable tool for the modern electrical energy management. The ability of the prediction of future behaviours is the basis for the effective management. Due to th...
EFFECTIVENESS OF RESIDUAL CURRENT DEVICES IN CIRCUITS OF ELECTRICAL INSTALLATIONS WITH FREQUENCY CONVERTERS
Commonly used in low voltage installations Residual Control Devices are the protective devices capable of detecting low leakage, ground or shock currents, but under certain conditions their trigger threshold may be signi...
WSTĘPNY MODEL POLOWY SILNIKA INDUKCYJNEGO ZASILANEGO NAPIĘCIEM ZAWIERAJĄCYM SUBHARMONICZNE
Artykuł dotyczy modelowania polowego silnika indukcyjnego klatkowego zasilanego napięciem zawierającym subharmoniczne. Zaprezentowano wstępny dwuwymiarowy model polowy silnika zaimplementowany w środowisku ANSYS Maxwell....
PRAKTYCZNE ASPEKTY NIEDOPASOWANIA ZAKRESÓW SPEKTRALNYCH SOND POMIAROWYCH DO OBOWIĄZUJĄCYCH KRYTERIÓW OCENY ZAGROŻENIA NIELASEROWYM PROMIENIOWANIEM OPTYCZNYM
W artykule przedstawiono przykłady niedopasowania widmowego metody radiometrycznej stosowanej do wyznaczania poziomów ekspozycji na stanowiskach pracy zgodnie z obowiązującymi kryteriami oceny zagrożenia promieniowaniem...