ПРО ВИКОРИСТАННЯ СЕЙСМІЧНИХ ХВИЛЬ РЕЛЕЯ У ОХОРОННИХ СИСТЕМАХ
Journal Title: Вимірювальна техніка та метрологія - Year 2015, Vol 1, Issue 76
Abstract
There are four types of seismic waves: primary waves , secondary waves , wave Rayleigh and Love waves. The first two types are called depth waves, because these waves penetrate into the depths of the earth. Rayleigh waves and Love waves called surface waves. They can to propagate on the surface. Given the characteristics of propagation of these waves can be concluded that even at low energies excitation source, Rayleigh waves can propagate at a much greater distance than depth waves, so it would be advisable to use them in security systems. Knowing the velocity of the waves, which is measured the sensors, the ratio of amplitudes and time delays with which they come, we can determine the coordinates of the source of vibration. The output voltage of existing sensors (seismometers) is a function of frequency seismic waves and their amplitudes. This may be the cause of the error. Autor is suggested another principle of the sensor, output signal of which is a function only of the amplitude. Is posted conversion function of sensors and dependence on the sensitivity threshold. If we know threshold of the sensitivity of the sensors, with certain assumptions, we can estimated distance from which capacitive seismometer feels seismic waves excited Walking man at different values of the coefficient of energy absorption of seismic waves geological environment. For seismic exploration seismic surface waves are interference. Most likely, this may explain the lack of information about the amount of energy that falls on the formation of surface waves and the dependence of this quantity on the power source. Zone of sensitivity may be limited to so-called microseisms arising from soil vibrations caused by fluctuations of the trees, transport, and industry. To limit the impact of microseisms be appropriate to apply filters. Therefore, before decision about the possibility of practical implementation of such systems, data relating to the area of sensitivity of seismometers need additional experimental verification in the field where necessary to experimentally explore: how much energy of the source belongs Rayleigh waves and Love waves ; energy distribution between surface waves; by the ratio of amplitudes determine the absorption coefficient of surface waves for areas where the security system will be used.
Authors and Affiliations
Володимир Рак
Keywords
Related Articles
- EP ID EP198436
- DOI -
- Views 63
- Downloads 0
Динаміка викидів забруднювальних речовин в атмосферу у Львівській області
Article contains the analysis of changes of the pollutant emissions in the atmosphere of Lviv region. Represented increasing tempos of the pollutant emissions that are caused by stationary and movable sources of pollutio...
МОЖЛИВОСТІ МЕТРОЛОГІЧНОЇ ПЕРЕВІРКИ ІНДИВІДУАЛЬНИХ ЛІЧИЛЬНИКІВ ТЕПЛА НА МІСЦІ ЕКСПЛУАТАЦІЇ
Concept of the metrological supply formation of commercial individual head counters at the exploitation place without mounting is considered.
МЕТОДИКА ОЦІНЮВАННЯ ДОСТОВІРНОСТІ ВИМІРЮВАЛЬНОГО КОНТРОЛЮ ПАРОВМІСТУ СИСТЕМОЮ ТЕХНІЧНОГО ЗОРУ
In the article is shown estimation of measurement control reliability during using a machine system vision by analyze errors of first and second type.
МАТЕМАТИЧНА МОДЕЛЬ ЕКВІВАЛЕНТНОЇ ДІЕЛЕКТРИЧНОЇ ПРОНИКНОСТІ НЕОДНОРІДНОГО СИПКОГО СЕРЕДОВИЩА З УЩІЛЬНЕНОЮ СТРУКТУРОЮ КУЛЬОВИХ ВКЛЮЧЕНЬ
The analytical method of determination of equivalent inductivity of heterogeneous friable environment is offered with the structure of including of bullets.
ПРОБЛЕМНІ АСПЕКТИ ОЦІНКИ ЯКОСТІ СІЛЬСЬКОГОСПОДАРСЬКОЇ ПРОДУКЦІЇ
The paper presents, using a multi-objective evaluation model of product quality, create the optimal structure of fertilizer for growing agricultural products as desired. The approbation of multi-objective evaluation mode...