Process Parameter Optimization of Electric Discharge Machining By Response Surface Methodology
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 9
Abstract
Electrical Discharge Machining (EDM) is a modern manufacturing process machining process, where electrically conductive material is removed by controlled erosion through a series of electric sparks of short duration and high current density between the electrode and the work piece were both are submerged in a dielectric bath, containing kerosene or distilled water . During this process thousands of sparks per second are generated, and each spark produces a tiny crater in the material along the cutting path by melting and vaporization. Generally the material is removed by erosion process. The top surface of the work piece subsequently resolidifies and cools at a very high rate. The application of this process is mostly found in press tools and dies, plastic moulds, forging dies, die castings, aerospace, automotive, surgical components manufacturing industries etc. This process is not restricted by the physical and metallurgical properties of the work material as there is no physical contact due to high energy electrothermal erosion between the tool and the work piece.
Authors and Affiliations
S. A. Sayyad, A. N. Chapgaon
Keywords
Related Articles
- EP ID EP22645
- DOI -
- Views 173
- Downloads 5
Intelligent Control Systems for Physically Disabled and Elderly People for Indoor Navigation
The needs of many individuals with disabilities can be satisfied with traditional manual or powered wheelchairs, a segment of the disabled community finds it difficult or impossible to use wheelchairs. There is extensiv...
Digital Watermarking on Multimedia Application
This paper incorporates the detail investigation of Digital watermarking clarification, idea and the principle commitments in this field, for example, classes of watermarking procedure that show which watermarking techn...
Combating Cybercrime: A Growing Trend Malvertising and Ransomware
Malware developers trick users to download their malware. By studying how Malvertising occurs, how sites are tricked and how to prevent it, one can better understand Malvertising. People across the globe are subjected t...
Use of Plastic Waste in Bituminous Road
disposal of waste plastic has become a serious problem and waste plastics are thrown out which cause environmental pollution. Utilization of waste obtain in production of recycle plastic pipe may be used as coarse aggre...
Short Range Inter Vehicle Communication, Sharing Information Using DSRC
Vehicular communication systems are a type of network in which the vehicles are the communicating nodes, providing each other with information, such as safety warnings and traffic information. As a cooperative approach,...