Production and characterization of composite materials with epoxy resin matrices reinforced with tire rubber and magnetite in different proportions
Journal Title: TecnoLógicas - Year 2019, Vol 22, Issue 44
Abstract
This work describes the production and magnetic characterization of a compound base on epoxy resin and powdered rubber reinforced with magnetite (𝐹𝑒3𝑂4) poder. Also it is presented the análisis carried out on the components, which are according to the magnetic charging inside the polymeric matrix. the magnetic properties of the material they were made at different temperaturas in a magnetic range from -30000 to 30000 Oe the morphology of both the precursons like the compounds was determined by scanning electron microscopy and structural characterizatin was performed by X- ray diffraction (XRD). The diffraction pattern obtained in the XRD measurements allows us to observe that, with the addition of powdered magnetite in the plastic matrix, an amorphous-crystalline transition is created in the material. Through the images obtained by SEM, the presence of hematite in the precursor (𝐹𝑒3𝑂4) and irregular size in the samples is observed. The compounds behave like a soft magnetic material and present changes in the variation of the coercive force, both with the increase in temperature and with the percentage variation of magnetite volume in the polymer matrix. The manufactured material can be used in applications where the compound should be easily detectable.
Authors and Affiliations
Felix Enrique Salinas Tacumá, David A. Landínez-Téllez, Andrés O. Garzón-Posada, Jairo Roa-Rojas
Keywords
Related Articles
- EP ID EP549652
- DOI 10.22430/22565337.999
- Views 74
- Downloads 0
Treatment of laboratory wastes by heterogeneous photocatalysis with TiO2
Environmental pollution caused by hazardous waste is a growing and globalized prob-lem. Suchwaste, once emitted, can remain in the environment for hundreds of years. Chem-ical substances are handled and s...
Dried fruit breadfruit slices by Refractive Window™ technique
A large amount of products are dried due several reasons as preservation, weight reduction and improvement of stability. However, on the market are not offered low-cost and high quality products simultaneously. Although...
Spectral analysis through filter banks aplied to preprocessing oriented to thresholding of pulse oximetry signal
The pulse oximetry signal (SPO2), allows the calculation of the oxygen saturation level in the blood, and it is acquired over the index finger of the patient. Under normal conditions, the variations in SPO2 have correlat...
Development and Testing of a Real-Time LoRawan Sniffer Based on GNU-Radio
This paper shows the vulnerabilities present in a wireless sensor network implemented over a long-range wide area network (LoRaWAN) LoRaWAN, and identifies possible attacks that could be made to the network using sniffin...
Transmission network expansion planning considering weighted transmission loading relief nodal indexes
This paper presents a model and a solution approach for the transmission network expansion planning (TNEP) problem that integrates security constraints given by weighted transmission loading relief (WTLR) indexes. Such i...