Productions of volatile oil and gas-condensate from liquid rich shales
Journal Title: Advances in Geo-Energy Research - Year 2019, Vol 3, Issue 1
Abstract
The growth in productions of liquid hydrocarbons from tight formations (shales) has been phenomenal in recent years. During the production of liquids (oil and condensate), large amounts of associated gas are also produced. The economic viability of a producing well depends on maintaining a reasonable proportion of liquid. The compositions and state of reservoir fluid play an important role in producing liquids from tight formations or shales in the USA such as Eagle Ford in Texas, Niobrara in Wyoming-Colorado, and Bakken in North Dakota. Small deviation in reservoir temperature around the critical point changes the state of the fluid (volatile oil or condensate) and as a result, the production of liquid is affected. Impacts of the state of the fluid (volatile oil or condensate), reservoir permeability and operating conditions on ultimate recoveries and produced gas liquid ratio are studied here. Five different reservoir fluids representing low to high liquid hydrocarbon contents are considered. Around 2% increment in condensate recovery after 10 years of production is observed from 100 nD permeability reservoir filled with the richest fluid (fluid 5) when the well is operated at 3000 psia compared to 1000 psia. At the same conditions, 9.3% more condensate is recovered for the leanest fluid (fluid 1). Therefore, operating the well at higher flowing bottom hole pressure (BHP) maximized the liquid recoveries of volatile oils and condensates in case of low permeability reservoirs (100 nD). However, in case of higher permeability (1000 nD) reservoir, lower operating pressure was preferable to increase the recovery. Conclusively, bottom hole pressure has less impact on the richer fluids and higher permeability reservoir. Operating well at higher BHP (3000 psia) also suppresses the production of gas and relatively enhances the production of liquid. Liquid to gas ratio (LGR) declines more rapidly for 100 nD permeability reservoirs compared to 1000 nD at BHP of 1000 psia. High fracture permeability (1000mD and above) appeared to negatively affect liquid recoveries at higher BHP resulting in reduction of recovery by around 2%. An optimum fracture permeability may be necessary based on reservoir permeability, operating pressure and type of fluid.
Authors and Affiliations
Palash Panja, Manas Pathak, Milind Deo
Keywords
Related Articles
- EP ID EP414023
- DOI 10.26804/ager.2019.01.02
- Views 119
- Downloads 0
Review of exploration and production technology of natural gas hydrate
Natural gas hydrate is an ice-like substance which is sometimes called “combustible ice” since it can literally be lighted on fire and burned as fuel. Natural gas hydrate is characterized by widespread distribution, larg...
The effect of flow resistance on water saturation profile for transient two-phase flow in fractal porous media
Due to the rapid development of Micro-Electro-Mechanical System (MEMS), more and more attention has been paid to the fluid properties of porous media, which is significant for petroleum engineering. However, most of surf...
Pyrolysis S2-peak characteristics of Raniganj shales (India) reflect complex combinations of kerogen kinetics and other processes related to different levels of thermal maturity
The Permian shales of the Raniganj basin, India, have experienced a dramatic burial history of rapid subsidence (Jurassic-Early Cretaceous) followed by igneous intrusion (Cretaceous) and rapid uplift and erosion (Late Cr...
Experimental study on spontaneous imbibition chatacteristics of tight rocks
In the exploitation of tight oil and gas reservoirs, multi-stage hydraulic fracturing technology is mainly used and a complex system of fractures and matrix is formed after fracturing. In the process of field production,...
Experimental study on evolution behaviors of triaxial-shearing parameters for hydrate-bearing intermediate fine sediment
Evolution behaviors of triaxial shearing parameters are very important for geo-technical response analysis during the process of extracting natural gas from hydrate-bearing reservoirs. In order to explore the effects of...