ПРОЕКТИРОВАНИЕ И ЭКСПЕРИМЕНТАЛЬНЫЕ ИССЛЕДОВАНИЯ СТАЛЕФИБРОБЕТОННОЙ ПЛИТЫ ПЕРЕКРЫТИЯ
Journal Title: World Science - Year 2018, Vol 1, Issue 11
Abstract
In the work, the design of the floor slab with five voids of steel fiber concrete, similar to a serial reinforced concrete slab, is proposed. Both plates are calculated in accordance with the regulations on the first and second limiting states. For experimental studies, a series of plates was made, each of which was tested before destruction. Scaling was used for all the plates, taking into account the design standards and technological capabilities of the laboratory. The loading of structures during testing was carried out in steps. Each step was 10% of the control load when checking the bearing capacity and crack resistance and 20% of the control load when checking the rigidity of structures. As a result of tests, the values of stresses and deflections were obtained as in theoretical calculations, the stresses in the concrete and steel fiber concrete slabs differ only slightly, and the deflections, especially up to 60% of the breaking load, differ several times, which confirms the much slower crack opening in the steel fiber concrete slabs. This suggests that at loads corresponding to the operational level, cracks will not open. The use of steel fiber concrete with preservation of linear reinforcement for the manufacture of hollow-core slabs allows to improve their characteristics, first of all - bearing capacity and crack resistance.
Authors and Affiliations
Н. Г. Сурьянинов, И. Б. Корнеева, А. Н Крыжановская
Keywords
Related Articles
- EP ID EP549262
- DOI 10.31435/rsglobal_ws/30112018/6230
- Views 124
- Downloads 0
ОСОБЛИВОСТІ ІНФОРМАЦІЙНО-УПРАВЛЯЮЧИХ СИСТЕМ ЛОГІСТИКИ В РОЗРІЗІ ЇХ ПІДСИСТЕМ
The place of information management system`s subsystems of trade organizations logistics in the enterprise information system is considered here. Particular attention is paid to the description of subsystems and the defi...
SPARING AND RECOVERY ROUTINE IN THE TRAINING AND REHABILITATION OF STUDENTS WITH SPECIAL EDUCATIONAL NEEDS
It is a well-known fact that students with special educational needs require a less demanding, healing regimen of schoolwork and rehabilitation. Nonetheless, our observations and the study we have conducted show that the...
ОСОБЛИВОСТІ РОЗРОБКИ ТА ВПРОВАДЖЕННЯ АВТОРСЬКОЇ ПРОГРАМИ КРЕАТИВНОЇ СТУДІЇ «ПОЕТИЧНЕ ЗЕРНЯТКО»
The article highlights the peculiarities of the development (the purpose, tasks, conditions of implementation, the forms of work in the studio, the results of the activity, pedagogical technologies in the studio, the exp...
СТВОРЕННЯ В ОСВІТНЬОМУ ПРОЦЕСІ ПРОФЕСІЙНО-ОРІЄНТОВАНИХ СИТУАЦІЙ, ЩО ВІДОБРАЖАЮТЬ ОСОБЛИВОСТІ ВЗАЄМОДІЇ З НИЗЬКОСТАТУСНИМИ ЧЛЕНАМИ УЧНІВСЬКОГО КОЛЕКТИВУ ЯК ПЕДАГОГІЧНА УМОВА ПІДГОТОВКИ МАЙБУТНЬОГО ВЧИТЕЛЯ ДО ВИХОВАННЯ ПІДЛІТКІВ З НИЗЬКИМ СТАТУСОМ ТА АУТСАЙДЕРІВ В УЧНІВСЬКОМУ КОЛЕКТИВІ
The article focuses on the optimal conditions of the training of the future teachers for the work with low-status teenagers in the pupils’ team. In the article, much attention is paid to the creation of professionally or...
DETERMINATION OF THE NECESSARY EXTENSION FOR THE DESIGNATION OF A 3D TWISTED DECORATIVE ELEMENT
The paper presents a mathematical model for calculating the necessary dimensions for the construction of a 3D twisted decorative element for garment. Two approaches are proposed to determine the required extension. For e...