Programming of adaptive machining for end milling
Journal Title: Mechanics and Advanced Technologies - Year 2017, Vol 79, Issue 1
Abstract
The problem of performing adaptive machining to program the milling of the detail contours on the CNC machine in case of virtual-location procurement is solved. The correction of the CNC-program by measuring the actual position of the workpiece on the machine table is proposed, and the correction of the control program can be implemented in the result of solving the task of minimax, when looking for such state of its position in space to the maximum allowance on the machined contour was minimal. A mathematical model is developed that unambiguously identifies the position of the workpiece on the machine table according to the measured coordinates of the three points. The developed algorithms automatically search for the correction of the CNC-program for implementing the principle of adaptive machining solution of the problem of minimax. The soft program is created and the method of designing the CNC-program for a virtual basing of the workpiece on the CNC machine is developed. Experimental testing has confirmed efficiency of the developed technique.
Authors and Affiliations
Y. Petrakov, D. Shuplietsov
Keywords
Related Articles
- EP ID EP456482
- DOI 10.20535/2521-1943.2017.79.97342
- Views 83
- Downloads 0
Study of energetic balance of the hydraulic system with fixed displacement pump and pressure relief valve
<p><em>It was analyzed </em><em>the basic schematics implementing energy level of industrial hydraulic systems. It was considered the structure and composition of the hardware system of fixed displacement pump and pressu...
Programming of adaptive machining for end milling
The problem of performing adaptive machining to program the milling of the detail contours on the CNC machine in case of virtual-location procurement is solved. The correction of the CNC-program by measuring the actual p...
Hot forming hollow products from high strength aluminum alloy with required treatment of metal structure by plastic deformation
<em>Using the finite element method conducted research of technology and established parameters of hot forming hollow products of alloy V93pch with required treatment of metal structure by plastic deformation to provide...
МЕХАНИЧЕСКИЕ СВОЙСТВА ПОВЕРХНОСТНОГО СЛОЯ РЕЖУЩИХ ЭЛЕМЕНТОВ ИЗ ПОЛИКРИСТАЛЛИЧЕСКИХ СВЕРХТВЕРДЫХ КОМПОЗИТОВ НА ОСНОВЕ КУБИЧЕСКОГО НИТРИДА БОРА
<p>Предложено оценивать параметры механических свойств поверхностного слоя рабочих элементов из поликристаллических сверхтвердых композитов на основе кубического нитрида бора режущих инструмент по результатам анализа ска...
Development of the choice procedure for separation method of section iron using complex criteria of materials destruction
Cluster analysis of materials destruction criteria was performed. Yield point is considered to be the most informative criterion among traditional ones. “Scale” is considered to be the most informative criterion among co...