PROPERTIES AND APPLICATION OF MOLDING CLAYS
Journal Title: International scientific journal Science and Innovation - Year 2023, Vol 2, Issue 11
Abstract
The maximum property enhancement in nano clays reinforced polymers is obtained when high levels of intercalation, exfoliation and dispersion of the nano clay in the polymer matrix is achieved. Processing of polymer nanocomposites by melt blending techniques requires sufficient stress levels and time for a maximum exfoliation/intercalation of the nano clays (with minimum polymer degradation), which both are very limited in conventional polymer processing techniques. Shear Controlled Orientation in Injection Moulding, SCORIM, is a non-conventional injection moulding technique based on the concept of in-mould shear manipulation of the melt during the polymer solidification phase. This technique is able of applying high shearing levels to the polymer, leading to high levels of molecular orientation. SCORIM of nano clay-based polymer nanocomposites may be therefore beneficial for achieving high levels of nano clay intercalation/exfoliation and orientation, thus imparting improved mechanical properties. In this work, a nano clay based masterbatch was mixed with polypropylene and direct injection moulded by conventional and SCORIM techniques. In SCORIM, two extreme shear levels were applied by changing processing conditions (melt temperature and shear time). We assess therefore the effect of high shear conditions in the levels of intercalation/exfoliation and orientation of the nano clay in the polymer matrix and in the mechanical properties of the nanocomposite. The levels of clay intercalation/exfoliation were evaluated by Wide-Angle X-ray Scattering
Authors and Affiliations
Toymas Madatov, Mahmudova Feruza, Muftullayeva Marziya, Sarvar Parmonov. , Asadjon Kambarov
Keywords
Related Articles
- EP ID EP725035
- DOI 10.5281/zenodo.10091655
- Views 39
- Downloads 0
ALPHA-PVP: EXPLORING A NEW PUBLIC HEALTH CHALLENGE
This study addresses the issue of the spread of synthetic cathinones, specifically Alpha-PVP, and their impact on public health. The paper thoroughly describes the chemical composition, metabolism, pharmacological, and t...
SECOND-ORDER HOMOGENEOUS WITH CONSTANT COEFFICIENTS MATHEMATICS IN TEACHING DIFFERENTIAL EQUATIONS REPLACE PACKAGES
In this article, it is homogeneous of the second order with constant coefficients it is intended to solve differential equations using analytical methods of solving using the Maple mathematical package, to show this proc...
ASSESSMENT OF THE TECHNICAL CONDITION OF THE POWER AUTOTRANSFORMER AT THE "YUKSAK" SUBSTATION
Currently, timely comprehensive diagnostics and analysis is the most important condition for the reliable operation of power autotransformers. Continuous monitoring of power autotransformers during the entire service lif...
EFFICACY OF CHEMICALS AGAINST SWEET BELL PEPPER PESTS IN HYDROPONICS
In the article, research was conducted to determine the effectiveness of chemical preparations against pollinator pests, which harm the export sweet bell pepper grown in modern hydroponic greenhouses. Researches were con...
IMPROVEMENT OF THE TECHNICAL ELEMENTS OF COTTON DRIP IRRIGATION AND STUDYING THE AMOUNT OF MOISTURE IN THE FIELD
In order to increase productivity, the use of water-saving irrigation technologies remains one of the important factors, in this sense, the installation of drip irrigation system and its correct use are important for irr...