PROPERTIES OF DUPLEX LAYERS PRODUCED IN A VACUUM CHROMIZING PROCESS ON STEEL COVERED WITH COBALT ALLOY
Journal Title: Tribologia - Year 2016, Vol 269, Issue 5
Abstract
The paper presents the results of examinations of the structure and properties of duplex layers of the CrC+(Co-W) type, produced in a vacuum chromizing process on a tool steel surface covered with Co-W electrolytic alloy. A comparison of the CrC+(Co-W) type duplex layers with the CrC type single carbide layers, produced in vacuum chromizing process, were performed. Studies of layers thickness, their hardness, structure, and concentration depth profiles of elements in the diffusion zone of these layers were carried out. Tribological properties of the layers and corrosion resistance were determined. It has been proven that the wear resistance by friction of the CrC+(Co-W) type duplex layers, produced by means vacuum chromizing of tool steel covered with Co-W alloy electrolytic coating, is as good as single carbide layers of the CrC type, but their corrosion resistance is higher.<br/><br/>
Authors and Affiliations
Ewa KASPRZYCKA, Bogdan BOGDAŃSKI
Keywords
Related Articles
- EP ID EP241325
- DOI 10.5604/01.3001.0010.6595
- Views 59
- Downloads 0
Właściwości tribologiczne ditiofosforanów alkoksylowych n-alkoholi, n-alkilofenoli i alkoksylowanych glikoli w układach tarciowych: stal-stal, tlenek glinu-tlenek glinu i tlenek glinu-stal
Dialkilo(arylo)-etoksyditiofosforany cynku (ZETP) – nowo otrzymane pochodne O,O-diestru kwasu ditiofosforowego ze względu na niższą zawartość fosforu i siarki w cząstece i wyższą temperaturę rozkładu niż dialkilo(arylo)d...
AN ESTIMATION OF SELECTED MATERIAL PROPERTIES OF THE HYDRODYNAMIC THRUST BEARING POLYMER LINING
Polymer materials are used more and more frequently for linings in hydrodynamic thrust bearings. The reason for that is that they exhibit many advantages in comparison with traditional bearings with babbitted pads. Relev...
EVALUATION OF DLC BASED COATINGS RESISTANCE TO INSTANTANEOUS DAMAGE UNDER SLIDING FRICTION CONDITIONS WITH DISTILLED WATER OR SALINE LUBRICATION
As a result of research on the evaluation of tribological properties of ultra thin DLC based ceramic coatings in flat sliding contacts lubricated with distilled water or saline a series of instantaneuos damage resistance...
THE INFLUENCE OF SOLID LUBRICANTS USED FOR THE LUBRICATION OF WHEEL FLANGES ON RAILWAYS TO REDUCE THE CORROSION OF RAILS
The paper presents the influence of selected solid lubricants used for the lubrication of wheel flanges of railways on the formation and development of corrosion. Tested solid lubricants consisted primarily of graphite,...
Wpływ urządzenia badawczego i parametrów procesu tarcia na rozrzut zużycia
Wartości zużycia uzyskiwane w badaniach tribologicznych dla tych samych skojarzeń materiałowych uzyskiwane w porównywalnych warunkach mogą różnić się znacząco. Wpływ parametrów procesu tarcia na porównywalność i powtarza...