PROPERTIES OF DUPLEX LAYERS PRODUCED IN THE VACUUM TITANIZING PROCESS ON TOOL STEEL COVERED WITH NICKEL ALLOY
Journal Title: Tribologia - Year 2011, Vol 238, Issue 4
Abstract
The paper presents the results of examinations of the structure and properties of duplex layers of the TiC+(Ni-Mo) type, produced in the vacuum titanizing process on tool steel covered with Ni-Mo electrolytic alloy. A comparison of the TiC+(Ni-Mo) type duplex layers with the TiC type single carbide layers, produced on steel surface in the vacuum titanizing process, was performed. Investigations of layers morphology, their phase composition, depth profiles and hardness, were conducted. Tribological properties (linear wear) of the layers were performed by means of taper-three- -roll test. The investigation proved that the wear resistance by friction of the TiC+(Ni-Mo) type duplex layers, produced by means vacuum titanizing of tool steel covered with Ni-Mo alloy electrolytic coating, is just as good as single carbide layers of the TiC type; however, tribological properties of the hardened steel samples without any layers were not good.<br/><br/>
Authors and Affiliations
Ewa Kasprzycka, Bogdan Bogdański, Jan Tacikowski, Dominik Smoliński
Keywords
Related Articles
- EP ID EP271479
- DOI -
- Views 59
- Downloads 0
Właściwości reologiczne biododatków pochodzenia roślinnego o działaniu przeciwzużyciowym
Przedstawiono wyniki badań tribologicznych i reologicznych modelowych kompozycji smarowych zawierających biododatki otrzymane z surowców odnawialnych (olejów roślinnych). Stwierdzono, że działanie biododatków uzależnione...
Zastosowanie spiekanych biomateriałów ze stali 316L na węzły tarcia endoprotez stawu biodrowego
Wśród zagadnień biotribologii jednym z najczęściej pojawiających się problemów jest wydłużenie trwałości endoprotez stawów. Konieczność zapewnienia korzystnych parametrów tarciowych przy zachowaniu wymogów biozgodności i...
EFFECT OF EXTERNAL LOAD ON THE PROCESS OF STEEL CONSUMPTION IN A SOIL MASS
This paper presents the results of a study on the effect of external load on the course and intensity of Hardox Extreme hardness steel wear in sandy soil. The research was conducted under laboratory conditions using a ro...
FRETTING CORROSION STUDIES OF MATERIALS USED FOR ELEMENTS OF HIP JOINT ENDOPROSTHESES
The operational durability of a hip endoprosthesis depends, among others, on the intensity of the damage processes of kinematic junction elements caused by fretting corrosion processes. In the article, the results of com...
THE QUESTIONS OF SPINNING FRICTION IN AN ELASTIC POINT OF CONTACT
The paper presents tangential stress as a result of friction change in the stress distribution in upper surface layer. The increase of this stress may be up to 100% at field of acting greater to 30%. It causes plastic de...