PROPERTY ASSESSMENT LUBRICANTS AND TRIBOLOGICAL LOTOS DYNAMIC ENGINE OIL
Journal Title: Tribologia - Year 2015, Vol 261, Issue 3
Abstract
This paper presents results of research the lubricating properties of welding load Pz, wear under load Ih, the non-scuffing load Pn. scuffing load Pt, and limiting wear load Goz on the tested trade lubricant and modified operational preparation (PE) having Motor Life Professional chemical properties. Studies have shown that the addition of operating preparation for Lotos Dynamic engine oil 0W/40 at 5% by volume affected the increase in load limit wear and the scuffing load. Modifying the lubricant improved the tribological properties of the grater bronze CuSn10 / steel X210Cr12 with a hardness of 60 HRC. The research was carried out on the lubricating properties of the tester T-02, while the tribological properties used tester T-05.<br/><br/>
Authors and Affiliations
Stanisław LABER, Alicja LABER
Keywords
Related Articles
- EP ID EP257773
- DOI -
- Views 52
- Downloads 0
Problem powstawania mieszaniny oleju smarowego i czynnika chłodniczego w węzłach tarcia sprężarek chłodniczych
Olej chłodniczy mający za zadanie smarowanie sprężarek oprócz podstawowych funkcji, czyli odprowadzania ciepła powstającego w szczelinach smarowniczych, przeciwdziałania zużywaniu się współpracujących elementów i uszczel...
FRETTING WEAR IN THE ROTATIONAL JOINT
This article will attempt to explain the development of fretting wear of an axle-sleeve rotational joint. The conditions for the development of wear are surface pressure and very small amplitude oscillations. The article...
THE INFLUENCE OF A UNIT LOAD ON THE STATIC FRICTION COEFFICIENT VALUE OF SELECTED METAL– –POLYMER FRICTION PAIRS
The main goal of the experiments was to determine the value of a static friction coefficient for particular friction pairs. Each friction couple consists of a plastic sample and a steel countersample. Pairs of materials...
CONSIDERATION OF TRIBOLOGY BASIS, PART 9. TRIBOLOGY IN THE TEACHING PROCESS AT UNIVERSITIES
The article presents aspects of teaching tribology. The functions of the subject in the teaching programme are analysed. The different variants of the place of tribology in the teaching process are described. Presented v...
TRIBOLOGICAL BEHAVIOR OF THE FRICTION PAIR “GRADE 2/PE-UHMW” AND THE TECHNOLOGY OF THE PRODUCTION OF ITS SPHERICAL PART MADE OF GRADE 2
An advance in the material engineering of biomaterials intended for hip joint replacement prostheses is a very important social matter due to incurable diseases or injuries of human joints happening to many people. For t...