PV Fed Interleaved Superboost Converter with MPPT Controller for Renewable Energy Applications
Journal Title: GRD Journal for Engineering - Year 2018, Vol 3, Issue 0
Abstract
Generally high voltage boost gain cannot be achieved in conventional step-up converters since the parasitic parameters will set an upper limit on the duty ratio at which the converter can efficiently operate. In recent years many high step-up DC-DC converters have been proposed. Among the developed converters, the high step-up single switch converters exhibit large input current ripple which make them unsuitable to operate at heavy load due to high conduction losses. So a new super boost converter is designed. This converter consists of switched capacitors and two coupled inductors. This combination of coupled inductors and switched capacitors can provide high voltage boost gain while operating with small duty cycle. By using one individual DC voltage source in an interleaved manner the converter can be powered. The configuration of the proposed converter advantages such as low power losses, longer lifetime of input sources due to non-pulsating input current, low voltage stress across the main switches and slow output fluctuation. The concept is to constant voltage By implementing this converter a 22.5 times gain can be reached 0.5 duty ratio and turns ratio equal to 2.Simulation results will be presented to demonstrate the authenticity of the proposed converter.
Authors and Affiliations
Akhil. N, Mr. David. E
Keywords
Related Articles
- EP ID EP295327
- DOI -
- Views 127
- Downloads 0
Battery Energy Storage System with Hybrid technology
In this thesis hybrid of Hydro-Solar generation system employing one Permanent Magnet Synchronous Generator (PMSG) driven by a constant-power hydro turbine. Battery storage is designed to supply continuous power to the l...
An Analysis of Particle Swarm Optimization with Data Clustering- Technique for Optimization in Data Mining
Data clustering is an approach for automatically finding classes, concepts, or groups of patterns. It also aims at representing large datasets by a few number of prototypes or clusters. It brings simplicity in modelling...
Comparison of SBS, Crumbled Rubber and Zycotherm on VG-20 Grade Bitumen
This paper presents the comparison between three modifiers used in bitumen. The commonly used SBS and Crumbled Rubber has been compared against Zycotherm, which is a new generation silane additive. The paper presents a c...
Study of Lean Manufacturing for Manufacturing of Auto Components
Lean manufacturing is the manufacturing philosophy and the system that was given by the Toyota, Japan and now the many of the manufacturers are using these techniques in industries. “Lean is simply a systematic technique...
Bio-Activator- As A Solution of Biological Treatment Problems in Dairy Industries
Dairy industries are one of the fastest developing industries of India, but at the same time it is one of the largest amounts of wastewater generating industry, both in case of quality and quantity. Dairy industry has ma...