Reaction dynamics during the testing of polymerization catalyst
Journal Title: Polyolefins Journal - Year 2015, Vol 2, Issue 2
Abstract
The olefins polymerization process in a slurry reactor is discussed. The reaction rate dynamics was analyzed and the contributions of feed flow, gas-liquid mass transfer, polymerization reaction, and catalyst deactivation were estimated. The propylene solubility in a solvent mixture “heptane” was calculated using Soave-Redlich-Kwong equation of state. These data were then approximated by Henry-like equation and the results were verified in experiments. The influence of propylene dissolving in ”heptane which was examined in special experiments without catalyst has provided the independent estimation of gas-liquid mass transfer coefficient. It has been shown that the reaction rate during the first 20-30 min of test is much lower (or higher) than total monomer consumption, depending on reactant addition sequence. The method of kinetic experiments interpretation and corresponding mathematical model are proposed. The method enables to estimate the kinetic parameter of monomer dissolution, the reaction rate constant of polymerization, as well as the parameters of active centers transformation – activation, deactivation and self-regeneration. An adequacy of model was proved by the description of experiments at two different pressures but with the same parameters values.
Authors and Affiliations
Nickolay M. Ostrovskii, Ladislav Fekete
Keywords
Related Articles
- EP ID EP283124
- DOI 10.22063/POJ.2015.1156
- Views 117
- Downloads 0
Quantification of identical and unique segments in ethylene-propylene copolymers using two dimensional liquid chromatography with infra-red detection
Hyphenating High Temperature High Performance Liquid Chromatography (HT-HPLC) with High Temperature Size Exclusion Chromatography (HT-SEC) (High Temperature Two Dimensional Liquid Chromatography (HT-HPLC x HT-SEC or HT 2...
Evaluation of continuous and discrete melting endotherms in determination of structural heterogeneities in Ziegler-Natta catalyzed linear low density polyethylene
Ethylene / 1-butene copolymers at different comonomer levels were synthesized using Ziegler-Natta catalyst to evaluate the applicability of thermal fractionation methods in predicting chemical composition distribution (C...
Testing DFT ability to predict the stereoselectivity of group 4 metallocenes in propylene polymerization
In this study we have tested the ability of a standard DFT computational protocol to reproduce the experimentally obtained stereoselectivity of 26 different C2-symmetric zirconocene catalysts active in propylene polymeri...
Effect of the synthesis conditions of titanium-magnesium catalysts on the composition, structure and performance in propylene polymerization
Supported catalysts synthesized via the interaction of Mg(OEt)2 with TiCl4 in the presence or absence of an internal stereoregulating donor (di-n-butyl phthalate), with different solvents (chlorobenzene, n-undecane, n-he...
Propene-cycloolefin polymerization
Highly active metallocenes and other single site catalysts have opened up the possibility of polymerizing cycloolefins such as norbornene (N) or of copolymerizing them with ethene (E) or propene (P). The polymers obtaine...