Reasons of Adding Carbon Nanotubes into Composite Systems
Journal Title: Технічні вісті - Year 2016, Vol 1, Issue 43
Abstract
Inclusion of CNT in the laminated composite system was found to increase the energy absorption of the whole composite after impact. The main important criteria is happened CNTs, which have good interfacial adhesion strong bonding with the matrix. Thus, it will be improve the properties/performance of the composite. Therefore, in current review paper the concentration/amount of the CNT, in term of loading, affect the performance of the composite and the mechanism on how the presence of CNT tends to absorb high amount of energy after impact have been discussed.
Authors and Affiliations
Elias Randjbaran, Dayang Laila Majid, Mohamed Thariq Hameed Sultan, Norkhairunnisa Mazlan
Keywords
Related Articles
- EP ID EP178519
- DOI -
- Views 103
- Downloads 0
Reasons of Adding Carbon Nanotubes into Composite Systems
Inclusion of CNT in the laminated composite system was found to increase the energy absorption of the whole composite after impact. The main important criteria is happened CNTs, which have good interfacial adhesion stron...
Класифікація зображень на основі застосування автоасоціативних нейронних мереж
The problem of images classification is considered. It is proposed to use the autoassociative neural networks based on the geometric transformation model for this problem solving. The advantages and disadvantages of this...
Обернена плоска контактна задача симетричних циліндричних оболонок
Inverse problem of contact interaction of two linear-elastic, symmetrical shells under the conditions specified distribution of contact stresses in geometrically nonlinear statement involving Tymoshenko type non-classic...
XXI золота міжнародна школа математичного моделювання
21-а Школа-семінар українсько-польської вітки AMSE-UAPL під егідою Міжнародної асоціації сприяння математичному моделюванню AMSE (Assotiation for Advansement of Modeling and Simulation Techniquw in Enterprises), відбулас...
Зміцнення відновленого поверхневого шару сталі 45 шляхом лазерного борування
By means of the proposed technologies, the relationship and strengthening of the optimal modes of recovery of the restoring layer and the optimal laser treatment modes with bat-retaining straps are chosen. The microstruc...