Reduction in Scratches & Edge Wrinkles Defects in CRM
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 3
Abstract
The Rolling is mostly used metal forming process due to its greater production and great control of finished products. . In the present competitive situation in this world we need to improve our areas in order to stay in the competition. The main concept of this project is to understand the process flow of CRM, and to identify the defects and to improve the defects in order to achieve high production. Two defects were identified. First are scratches and being Edge wrinkles. To overcome the defects here hydro motor is installed at exit bridle for scratches and proper tension in the coil with suitable modes (deflector or bridle) and maintaining proper tension in the coil for full width.
Authors and Affiliations
Dr. G Jagannatha Reddy, B. vinay
Keywords
Related Articles
- EP ID EP437927
- DOI 10.9790/1684-1503033034.
- Views 59
- Downloads 0
Optimization of Printing Press Operations
Printing technology has seen technological advances in the field of automation because it is a very dynamic and innovative process. A good printing factory layout maximizes production with minimum investment in new equip...
Effect of Bonding Layer and Admixtures on Performance of Ultra Thin White Topping
Traditionally, Cement concrete has been perceived as a material for newpavement construction, in particular for streets with heavy axle loads. However, with respect to pavement rehabilitation, agencies many a times consi...
Improvement on Mechanical Power Transmitter to Meet the API 610 and API 671 Standards in the Petrol Industry
The Petroleum Industry is one of the largest and broadest entrepreneurs of the world, and it grows each year, with new technologies and new innovation perspectives. The hydrocarbon exploration is a risk-filled activity,...
Seismic Behavior of Ground Rested Rectangular RC Tank Considering Fluid- Structure- Soil Interaction
Many liquid storage tanks around the world have affected by earthquakes. Seismic analysis of such tanks is much complicated due the Fluid-Structure Interaction (FSI). Furthermore, when the soil properties are taken into...
Fixed Offshore Platform Rehabilitation with Friction Damper
This work presents a study for a fixed offshore platform to show the value of applying friction damper in increasing the lateral resistance under wind, waves and currents. It is considered an extendable work for previous...