Relationships between the fatigue crack growth resistance characteristics of a steel and the tread surface damage of railway wheel
Journal Title: Archives of Materials Science and Engineering - Year 2018, Vol 2, Issue 90
Abstract
Purpose: The aim of the proposed research is to establish experimentally the relation between damaging of the tread surface of model wheels and the characteristics of fatigue crack growth resistance of wheel steels "KI th, "KII th, "KI fc, "KII fc), depending on its microstructure. Design/methodology/approach: Characteristics of the fatigue crack growth resistance have been determined on the specimens cut out from the hot rolled plate of thickness 10 mm of the steel which is an analogue of railway wheel steels. To obtain different steel microstructures and its strength level, test specimens were quenched (820°C, in oil) and then tempered at 400°C, 500°C, and 600°C for 2 h. The characteristics of Mode I fatigue crack growth resistance of steel were determined on the basis of fatigue macrocrack growth rate diagrams da/dN–"KI, obtained by the standard method on compact specimens with the thickness of 10 mm at a frequency of 10-15 Hz and the stress ratio R = 0.1 of the loading cycle. The characteristics of Mode II fatigue crack growth resistance were determined on the basis of da/dN–"KII diagrams, obtained by authors method on edge notched specimens with the thickness 3.2 mm at a frequency of 10-15 Hz and R = –1 taking account of the crack face friction. The hardness was measured with a TK-2 hardness meter. Zeiss-EVO40XVP scanning electron microscope was used for microstructural investigations. Rolling contact fatigue testing was carried out on the model specimens of a wheel of thickness 8 mm and diameter 40 mm in contact with a rail of length 220 mm, width 8 mm and height 16 mm. Wheels were manufactured form the above-described steel after different treatment modes. Rails were cut out from a head the full-scale rail of hardness 46 HRC. The damaging was assessed by a ratio of the area with gaps formed by pitting and spalling to the general area of the wheel tread surface using a special stand. Findings: The growth of the damage of the tread surface of the model wheels correlates uniquely with the decrease of the cyclic fracture toughness of the wheel steel "KI fc and "KII fc, determined at Mode I and Mode II fracture mechanisms. These characteristics of the wheel steel can be considered as the determining parameter of this process, in contrast to the fatigue thresholds "KI th and "KII th. Research limitations/implications: Investigations were conducted on model wheels that simulate the damage of real railway wheels tread surface. Practical implications: A relationship between the damage of tread surface of railway wheels and the strength level of wheel steels is determined. Originality/value: The damage of the tread surface of the model wheels during the rolling contact fatigue of the pair wheel-rail increases with the growth of the strength (hardness) of the wheel steel, which corresponds to the statistical data of the operation of the real railway wheels.<br/><br/>
Authors and Affiliations
O. P. Ostash, V. V. Kulyk, T. M. Lenkovskiy, Z. A. Duriagina, T. L. Tepla
Keywords
Related Articles
- EP ID EP346413
- DOI 10.5604/01.3001.0012.0662
- Views 48
- Downloads 0
Research of illuminating parameters halogen-filled and LED lamp for optoelectronic measuring system
Purpose: The purpose of this paper is to study and compare the light and technical characteristics of halogen and LED-lamps and to determine the effect of lighting quality on the accuracy of the measurement of the optoel...
System of single-piece flow case hardening for high volume production
Purpose: Purpose of this paper is development of single-piece flow system to precisionthermal treatment of parts of mechanical gear using a short-pulse low-pressure carburisingtechnology (developed for a new large-chambe...
Study the precision of fixed partial dentures of Co-Cr alloys cast over 3D printed prototypes
Purpose: of this paper is to investigate the accuracy of Co-Cr dental bridges, manufactured using 3D printed cast patterns. Design/methodology/approach: Four-unit dental bridges are fabricated from the alloys i-Alloy and...
Life cycle assessment of technical systems taking into consideration degradation processes in materials of constructions
Purpose: In the engineering analysis and transport forensic examination, there are often arise problems in establishing the causes and mechanism for the destruction of structural elements. At the moment, s...
Geometrical structure investigation of the surface of internal oesophagus prosthesis
Purpose: The aim of the work was roughness investigation of the surface of developed oesophageal prosthesis before and after texturing, to estimate its influence on future application of prosthesis. Design/methodology/ap...