Reliability and Optimization of the Manufacturing of Steel Flanges, by using Mechanical Method, Statistical Method, Firefly Algorithm
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 2
Abstract
This paper presents the reliability calculation and the optimization of the manufacturing process of steel flanges, by using three methods: the first is the mechanical method based on feedback and the analysis of failure modes. The second one is the statistical method for determining the mathematical model of the reliability factors. The last one is the optimization method by the Firefly algorithm. On the mechanical method we used the feedback experience to define all the elements related to reliability, and the identification of failure modes, the target of the statistical analysis method is to value the results of the mechanical, we used the optimization method through the Firefly algorithm to calculate the values of the reliability factors for the two steel flanges, by concluding on the most reliable and optimal manufacturing process.
Authors and Affiliations
Nour-Eddine M’Haouache, Mariam Elkhechafi, Hanaahachimi . , Moulaytaibbelghiti .
Keywords
Related Articles
- EP ID EP579833
- DOI 10.24247/ijmperdapr201910
- Views 72
- Downloads 0
Numerical Analysis of Flow Over NACA0012 at Fixed Mach Number using Computational Fluid Dynamics
In this present work, we carry out a numerical analysis of lift and drag performances of NACA0012 airfoil at various angles of attack, by using computational fluid dynamic software. We can also utilize wind tunnel testin...
Development and Optimization of Experimental Data based Models for Bamboo Sliver Cutting by using Human Powered Flywheel Motor
This paper presents the development of the experimental data based mathematical models for cutting the slivers from bamboo by means of human powered flywheel motor. There were various dependent and independent variables...
Effect of Screen Mesh Wick and Al2o3 Nanofluid Concentration on Circular Heat Pipe Performance
It is a passive heat transfer device that is used to remove the amount of heat from the heat source. The behavior of screen wick and nanofluid to improve the performance of a heat pipe.Al2O3 /DI-water based nanofluid is...
EXPERIMENTAL INVESTIGATIONS OF EFFECT OF HEATED ABRASIVES ON ABRASIVE JET COATING REMOVAL RATE ON THE SOFT BASE MATERIALS
Coating removal is an important process during the recondition and recoating process of ship base section, bigger structures, marine components, windmill wings and other engineering components. It is essential to remove...
Experimental Determination of Buckling Strength of Stiffened Panels
In engineering application, the use of stiffened plates made of composite structures has ve increased over the last few decades due to its high efficiency in terms of high stiffness to low weight and high strength. Gener...