Removal of cadmium from aqueous solution using nano Prosopis cineraria leaf ash (NPCLA)
Journal Title: Environmental Health Engineering and Management Journal - Year 2023, Vol 10, Issue 2
Abstract
Background: Heavy metal pollution has become one of the most severe environmental problems, therefore, the present study was conducted to investigate removal of cadmium (Cd) from aqueous solution. Methods: In the present study, nano Prosopis cineraria leaf ash (NPCLA) was used as an adsorbent for removing Cd from aqueous solution. Contact time, initial pH of the solutions, sorbent dosages, and initial Cd (II) concentration were considered as parameters affecting Cd removal efficiency. The experiments were designed by Design of Expert (DOE) software. Results: It was revealed that an NPCLA dosage of 2.45 gL-1, pH of 6.3, and initial Cd (II) concentration of 20.7 mgL-1 in contact time of 60 min was the optimum condition for removal of Cd (II) in the domain of experiments and at this optimum condition, the prediction value of removal efficiency was found 99.9%. Based on the results of kinetics experiments, the sorption system and experiment data of Cd (II) adsorption on the NPCLA followed the pseudo-second-order kinetic model. Freundlich, Langmuir, Brunauer-Emmett-Teller (BET), and Temkin isotherm models were investigated. The equilibrium adsorption data were fitted well with linearly transformed Langmuir isotherm with a correlation coefficient of R2 = 0.9877, and the maximum sorption capacity of NPCLA was obtained to be 25.25 mgg-1. Conclusion: In laboratory conditions, NPCLA can remove Cd from aqueous solution with a high efficiency. Therefore, due to this plant’s availability and cheapness, NPCLA can be considered a suitable option for producing adsorbents on industrial scales.
Authors and Affiliations
Milad Pourjaafar, Ali Askari, Ali Salehi Sahl Abadi, Bagher Anvaripour, Afshar Nemati, Seyed Ali Rahimi , Mona Pourjafar
Keywords
Related Articles
- EP ID EP718089
- DOI 10.34172/EHEM.2023.25
- Views 54
- Downloads 0
Determination of parabens in wastewater and sludge in a municipal wastewater treatment plant using microwaveassisted dispersive liquid-liquid microextraction coupled with gas chromatography-mass spectrometry
Background: Due to the complexities involved in the extraction of micropollutants, the information regarding micropollutants like paraben in wastewater and sludge is scarce. The aim of this study was to adopt a microwave...
Sulfation of metal-organic framework (MOF) nanocatalyst for esterification of oleic acid with methanol to produce biodiesel
Background: Metal-organic frameworks (MOFs) represent tremendous potential as heterogeneous catalyst in renewable energy production. In this study, biodiesel production using the modified MOF nanocatalyst was investiga...
Seawater reverse osmosis membrane fouling causes in a full scale desalination plant; through the analysis of environmental issues: raw water quality
Background: Membrane clogging is one of the most important problem for desalination plant operators in Iran, therefore, this study was conducted to investigate the main causes of this problem using field analysis. Met...
Evaluation of biosurfactant production by Sporosarcina halophila and its application in crude oil remediation
Background: Biosurfactants are valuable microbial products that have significant applications in various industries. The advantages of these compounds are biodegradability, low toxicity, activity in difficult environme...
Treatment of tofu liquid waste using anaerobic-aerobic biofilm aeration system to reduce pollution
Background: Tofu derived from processed soybeans is popular among the public, but its production has an unfavourable effect. After all, it produces liquid waste that causes quite high pollution because it contains quit...