Removal of Ni (II) From Aqueous Water Using A Mixture (50: 50) of Bentonite and China Clay As An Adsorbent
Journal Title: UNKNOWN - Year 2015, Vol 4, Issue 3
Abstract
Abstract: Waste water contains heavy metals as toxic pollutants; Nickel is one of them which need to dispose carefully in the environment. A potential adsorption of nickel from various aqueous solutions was performed. Parameters such as pH, interaction of different cations like K(I), Na(I), Mg(II), Ca(II), contact speed RPM; contact time and the concentrations of adsorbent and adsorbate were studied to optimize the conditions to be utilized on a commercial scale for the decontamination of effluents using a batch adsorption technique. Adsorption parameters were determined using Langmuir isotherm. The optimum pH for nickel removal was 6, the percentage of nickel removal at equilibrium increases with increasing the amount of wastes. The removal of Ni(II) ions attained 74-77 %., this means that Ni(II) can be effectively removed from aqueous solutions by wastes. The mechanisms for adsorption of Ni(II) ions from wastes involved complex formation of nickel with rubeanic acid which was estimated spectrophotometrically.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP357103
- DOI -
- Views 69
- Downloads 0
Emotion based coping and subjective happiness among higher secondary students
Emotion based coping and subjective happiness among higher secondary students
Contrast Enhancement Based Image Manipulation Detection
Today photograph may be used for several beneficial purpose such as evidence in court. Contrast enhancement is used for adjusting the brightness and contrast of a digital image. Users may change the contrast locally and...
Joint Forest Management for Decline off Villagers Migration Problem: A Case Study of Three Villages of Central India
Through migration human being move from one place to another place in pursuit of certain cherished objectives like avenues of better employment, better wages, better working and living conditions, better quality of life...
Quaternary Arithmetic Logic Unit Design Using VHDL
The arithmetic logic unit (ALU) is the core of a CPU in a computer; the adder cell is the elementary unit of an ALU. The constraints the adder has to satisfy are area, power and speed requirements. The delay in an adder...
Advance Patient Monitoring Gloves for Surgical or Non Surgical Treatment
Patient monitor play a key role during treatment. Patient monitor uses to see some parameters. During operation doctor see patient monitor or other device for checking that patient-s blood pressure, SPO2, ECG, temperatur...