Repair and Rehabilitation Techniques Using in School of Engineering Building
Journal Title: International journal of Emerging Trends in Science and Technology - Year 2017, Vol 4, Issue 4
Abstract
In today’s time there is shown presence of defects in building because of poor quality control during the construction, lack of maintenance and unfavourable or abrupt change in the weather condition. It is essential to maintain quality in terms of material quality, mixture with their desire specification, workmanship etc. During the construction stage and after the construction suitable maintenance system should be there to reduce tendency of occurring defects in the building for durable and reliable future usage of the building. Cracks are common and major defects are shown in the building occurring mainly because of uneven distribution of shear stresses at poor structural sections so that an engineer should have sufficient knowledge about suitable repairing techniques for particular type of damage in the structure like, which type of defects is there, its reason, its adverse effects and other characteristics of constitution material by that there will be suitable final decision of evaluate the repairing technique to get desired reliable output. It is very tropical process to estimation of materials because of so many irregularities in distress. There is no accurate measurement for depth and width which is same throughout the length of cracks and dimensions of efflorescence. This report includes a case study having estimation and costing as reference to other case studies with their remedial measures and some repair
Authors and Affiliations
Ravi Choksi
Keywords
Related Articles
- EP ID EP245308
- DOI -
- Views 101
- Downloads 0
A Study on Stomatal Complex of Certain Epiphytic Orchids
In the present study stomatal complexes of nine species of epiphytic orchids were studied. All the leaf of selected orchids are leathery in texure, Hypostomatic condition is predominant, The minimum stomatal index was re...
Zone centre Phonon Mode Behavior of cubic phase of Ternary Nitrides
We have studied the phonon mode behavior of the ternary InxGa1-xN and AlxGa1-xN at zone centre using de Launey Angular force constant model. The phonon frequency at zone centre has been found for InxGa1- xN and AlxGa1-xN...
Fusion of Sclera and Periocular Features for Biometric System
This paper proposes the biometric verification system based on ocular features. We form the multimodal biometric system considering two recent biometric traits in ocular region- sclera region and periocular region. For f...
Exceedance Level of Air Pollutants in an Urban Area as a Tool for Designing Air Purifiers
The air pollution exceedance status of an urban area has been studied for three different location for six different air pollutants such as Sulphur dioxide (SO2), Oxides of nitrogen (NOx), by Wet chemical method (West &...
Dye removal by Adsorption using waste biomass: Sugarcane Bagasse
Dye removal from industrial effluents is an important environmental concern. Various physical and chemical treatment methods can serve this purpose, of which the most economical and effective one is adsorption. A variety...