Representation of the Effect of Plasma Column Disturbances on the Static and Dynamic Characteristics of Arcs Described by the Modified Pentegov Model. Part 2. Modelling the Effect of Rapid Disturbances on Electric Arc Characteristics
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2016, Vol 60, Issue 6
Abstract
The article presents universal functions approximating quasi-static characteristics of electric arc with undefined and defined ignition voltage. The above named approximations take into consideration the effect of disturbances on an arc column. The approximations were used to create a modified mathematical Pentegov model of arc characterised by high and low rate of disturbance changes. The simulation of processes in a circuit with electric arc involved the use of the modified Pentegov model with one and two-parameter rapid disturbances. The authors demonstrated the efficiency of the developed modifications of the Pentegov model.
Authors and Affiliations
Antoni Sawicki, Maciej Haltof
Quality Assessment of Welded Joints Using TOFD Technique in View of Requirements of Current Standards
The article describes the classification and evaluation of TOFD indications according to PN-EN ISO 10863 and PN-EN ISO 15626 as well as identifies, discusses and illustrates numerous examples of typical problems connecte...
Measurement System for the Monitoring of Laser + MAG Welding Parameters
This paper presents the design, technical possibilities and the intended use of a multi-station measurement system for HLAW process monitoring. The system used at the production site allows the monitoring and recording o...
TIG Welding of Titanium Alloy VT22 Performed Using the External Control Magnetic Field
The article presents results of tests concerning the effect of transverse magnetic field on the change in the spatial position of arc column during the TIG flux-cored welding of titanium. The tests enabled the developmen...
Non-Destructive Testing of Brazed Joints Made in Thin-Walled Austenitic Steel Pipes
The article discusses methods used in the non-destructive testing of brazed joints made in thin-walled austenitic steel pipes using nickel and silver-based filler metals. Comparative tests involving the use of the radiog...
Analysis of Distribution of Temperature and Stresses during the Friction Metallisation of AlN Ceramics with Titanium
The article presents the results of the numerical analysis of an AlN-Ti joint obtained during friction welding, where a titanium probe was rubbed frontally into the base of nitride ceramics. The process aimed to create a...