RESEARCH AND APPLICATION OF UNIVERSAL REGULATION SYSTEM IN ORDER TO MASTER THE SOURCE OF MECHANICAL SYSTEMS EXCITATION
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2014, Vol 2014, Issue 84
Abstract
In general terms the mechanical systems (MS) means the system of driving and driven machines arranged to perform the required work. We divide them into MS operating with constant speed and MS working with a range of speed. In terms of dynamics we understand MS as a system of masses connected with flexible links, it means systems that are able to oscillate. Especially piston machines bring heavy torsional excitation into the system, which causes oscillation, vibration, and hence their noise. Governing of the torsional vibration, as a source of MS excitation, on a basis of results of our research, can be achieved by applying a pneumatic coupling tuned by the proposed universal control system. On this basis, it can be concluded that with given connection a new continuous tuning method in steady state a connection of MS is created. Therefore, the aim of project will be the research, application and analysis of the function of universal control system for governing the MS excitation source with proposed method.
Authors and Affiliations
Jaroslav HOMIŠIN
Keywords
Related Articles
- EP ID EP99616
- DOI -
- Views 53
- Downloads 0
Simulation research of car suspension system in ADAMS/CAR software
The paper presents possibility of virtual car suspension model building in Adams/Car software. The front McPherson suspension with rack and pinion steering system and semi-trailing arm rear suspension of Fiat Seicento ca...
HOW TO SECURE BASIC EVIDENCE AFTER AN AVIATION ACCIDENT
This article attempts to provide a synthesis of basic directions indispensable to accurately collecting evidence after an aviation accident. The proper collection procedure ensures the avoidance of the loss of evidence c...
COMPARISON OF PNEUMATIC FLEXIBLE SHAFT COUPLING STATIC LOAD CHARACTERISTICS OBTAINED EXPERIMENTALLY AND BY CALCULATION
Pneumatic flexible shaft couplings allow the change of their stiffness by the pressure change of gaseous medium in their pneumatic flexible elements, allowing their use as a device for continuous tuning of torsional osci...
CELE PROJEKTU GRANTOWEGO: „BADANIA I ZASTOSOWANIE UNIWERSALNEGO SYSTEMU REGULACJI, POZWALAJĄCEGO ZAPANOWAĆ NAD ŹRÓDŁEM WZBUDZANIA UKŁADÓW MECHANICZNYCH”
Ogólnie pod pojęciem układów mechanicznych (UM) rozumiemy układy napędowe oraz napędzane maszyn, ustawione wobec siebie w taki sposób, aby mogły wykonywać wymaganą pracę. Dzielimy je na UM pracujące przy stałych obrotach...
THE POSSIBILITIES TO REFLECT THE OPERATIONAL CONDITIONS AND THEIR EFFECTS IN THE SELECTED ROLLING-SLIDING CONTACT
The influence of the most important operational factors, ie load, slip and speed on the tribological properties, such as wear, friction coefficient, which is the main cause of wear fatigue in the rolling-sliding. Obtain...