Research into the process of loading the surface of a vibrosieve when a loose mixture is fed unevenly
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 1
Abstract
<p>The work examines the influence of uneven feeding of a loose mixture on the process of loading a vibrating sieve. In this work, we established regularities of layer thickness, longitudinal and transverse components of velocity, density of loose mixture and specific load on the entire area of a vibrating sieve at uneven feeding at the inlet. The uneven feed was assigned by using a convex profile, a concave profile, and a triangular profile of the initial velocity for width at the inlet of a sieve.</p><p>Flow characteristics change equally along the length of a sieve for the profiles considered. Flow characteristics change according to the initial velocity profile for width of the sieve. For a convex profile, the thickness is constant, the surface density and the longitudinal component of the velocity are the greatest along the longitudinal axis of the sieve, and they are the smallest near the side walls, the direction of the transverse component of the velocity is from the longitudinal axis to the side walls. For a concave profile, the thickness is constant, the surface density and the longitudinal component of the velocity are the greatest along the side walls, and they are the smallest along the longitudinal axis, the direction of the transverse component of the velocity is from the side walls to the axis. For a triangular profile, the thickness is constant, the surface density and the longitudinal component of the velocity are the greatest along one side wall, and they are the smallest along the opposite wall, the direction of the transverse component of the velocity is toward the first mentioned side wall.</p><p>For a convex profile of the initial velocity, the surface is overloaded along the longitudinal axis of the sieve and it is underloaded along the side walls. For a concave profile, the surface is overloaded near the side walls, and it is underloaded along the longitudinal axis of the sieve. For a triangular profile - the surface is overloaded along one side wall and it is underloaded along the opposite one. The largest deviations of the specific load occur near the inlet section of the flow, the smallest ones - near the outlet section.</p>The regularities of distribution of the specific load of the sieve are decisive in the design of feeders and distributors of loose mixtures, as well as in calculation of separation modes
Authors and Affiliations
Mykhailo Piven, Vadim Volokh, Alyona Piven, Sergei Kharchenko
Keywords
Related Articles
- EP ID EP528246
- DOI 10.15587/1729-4061.2018.149739
- Views 76
- Downloads 0
Development of an integrationanalytical method for the initiation of construction projects of industrial objects
<p class="a"><span lang="EN-US">We studied management processes of initiation of industrial projects. We considered the specific features of industrial objects construction projects that affect a structure of a project l...
Principles of the progress of reactions involving deep oxidation of isopropyl alcohol under conditions of aerosol nanocatalysis technology
<p>We studied the process of deep oxidation of isopropyl alcohol under conditions of aerosol nanocatalysis technology. The process was carried out in a reactor with a vibro-fluidized bed of a catalytic system, which cons...
Identification of heat exchange process in the evaporators of absorption refrigerating units under conditions of uncertainty
<p>Analysis of the evaporator of the absorption refrigerating secondary condensation unit of ammonia production was performed. The need to minimize the temperature mode of operation of the evaporator, which provides for...
Advancement of a long arithmetic technology in the construction of algorithms for studying linear systems
<p>We have advanced the application of algorithms within a method of basic matrices, which are equipped with the technology of long arithmetic to improve the precision of performing the basic operations in the course of...
Increasing efficiency of plasma hardening by local cooling of surface by air with negative temperature
<p>The martensitic transformation interval of some hypoeutectoid, all eutectoid and all hypereutectoid steels covers to a large extent the region of negative temperatures. Due to the fact that the plasma hardening operat...